Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Telnet-like ASCII TCP client for ARC: connect to IP:port, send ASCII, view raw or HEX server responses with local echo
Featured
DIY low-cost robots and tutorials: donated EZ-Board enabled 3D-printed Rori coffee robot for an Indonesian web series, remote-controlled.
question
Qr Codes , Distance , Size And Color
Hello I have some neat ideas for navigation involving QR codes on the ceiling. This ofcourse involves cameras pointed strait up. I believe I may...
10
5 k
jstarne1 |
question
ARC For Ar Drone 2.0
hey, I am a student for mechanical engeneering and mechatronics. My final project is relate to AR drone. I want to ask if this software can be interface to AR DRONE 2.0 or only to...
14
3 k
esh |
question
Servo Positioning Values
Afternoon All I'm having trouble getting any positioning on my 180 degree servos. No matter what values I put in the unit does a complete arc. I can add speed control but...
17
4 k
Dave Schulpius |
question
Ez Heat And Project Box
Morning All Does anyone have experience or an opinion on putting an EZ Board in a project enclosure box (like the ones from Radio Shack)? I want to protect from damage and...
25
6 k
Dave Schulpius |
question
Rad 2.0 On Ebay
Just thought this would be a good bot for someone to hack. R.A.D. 2.0
0
3 k
rgordon |
question
Hello Folks!
This is my first post here, and I don't have any EZ-Robot parts yet. However, I'm expecting I'll want to get some pretty soon, and I wanted to pick the brains of all you fine folks as to the project I have in mind. First, my robots purpose: Obviously, to have fun. But basically, a "pet." I'm moving to an apartment, and I honestly can't...
8
2 k
Steve1DH |
question
Neat Idea For 3D Printer
Guys, look at this! save 90% on the plastic for 3D printers. print with Plastic Pellets and recycled mistakes. link for 90% savings. enjoy!
1
3 k
jstarne1 |
question
Onboard Or Cool Remote , Acer W3 Win 8 Tablet Netbook Alternative
I wanted to point out this for an excellent netbook alternative. I got to play with it a...
13
4 k
MovieMaker |
question
Got In The Regulators And Some Were Three And Four Accross.
I finally got in my 44 regulators. I discovered it wasn't forty-four , it was 24. That is two sets of 10s. This will be just the right number. But, have any of you experienced this before. They are layed out and have 3 and 4 regulators on pcs across. So, do I simply snap the PC card like a cookie? or do I have to saw it? They are inked but not...
4
2 k
MovieMaker |
question
Spray Paint Disaster
I used a chrome spraypaint to change my robots colour, the one I used is normally used on cars.(I put a primer on first) I did a really good job, let them dry and stored the bits...
17
10 k
Doombot |
question
R/C Help
Hi sure this is posted someplace but I can't find it.. When away from the home computer can the commands that are uploaded still run independent? And the rest run from a R/C transmitter? As I understand the system the ez "brain" needs the robot to be near the computer so taking it outside would need a R/C transmitter to do the navigation...
2
2 k
jstarne1 |
question
Ping Roam V1.1.0
V1.1.2 available on page 3 Taking on board some of the comments made recently regarding autonomous roaming, plus a few improvements I wanted to make I have updated the Ping Roam script...
47
12 k
vhs896 |