Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Immersive Meta Quest VR control for Synthiam ARC robots: stereoscopic camera view, map servos to hands/controllers, plus built-in remote desktop.
Featured
Sculpture inspired by Asimov's I, Robot explores robots protecting humanity; face-tablet shows human faces and clips of war, pollution and decay.
question
Ir Watsh
hi all.has anyone use this or know how to program this watsh.it has an ir signal.
1
3 k
Nomad 6R |
question
$500 3D Printer
https://revision3.com/tekzillabites/da-vinci-printing-ces-2014 I cant wait to get my hands on this thing!
6
3 k
jstarne1 |
question
Self Navigating Flapping Drone
For those who haven't seen this article.... Flapping Drone!
1
3 k
stonewolf |
question
Submarine / Rov Robot Ideas?
Has anyone built a sub / ROV and wants to share the design?
4
3 k
Antron007 |
question
Swamped With New Robots For Ez-B Modifications
My " friend"? found two RC type robots at a garage sale for next to nothing, a roaring Trex and a V2 Robosapian in...
17
5 k
Nomad 6R |
question
2 Omnibots For A Bargain Price
Check this out: https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=201021690539&ssPageName=ADME:B:SS:DE:3160 Mike
5
2 k
MikeDC |
question
Roboearth
Interesting read. RoboEarth.org
3
3 k
Antron007 |
question
Ez-Office Cameras
Are the live office cameras going to be turned back on? No big deal, just wondering.
1
2 k
DJ Sures |
question
Ez Bits (Specifically Servos) For The Hexapod
I am going to attempt to use one of my v3 ez-board to control this hexapod. I have just about finished the print. Now I need to put servos in in the ez bits what servos do I need to get to fit?
5
3 k
Nomad 6R |
question
ARC Online Help
We have been building an online help with video tutorials for ARC. If you have any suggestions or questions for tutorials, let us know. You can find the online manual under the EZ-Builder...
59
8 k
rowdyjoe |
question
Ez B & Xbee Connection Question
Hi, my name is Eric I am having trouble getting ARC connected to the ez board. I am using 2 xbee instead of Bluetooth. I can get the xbee to communicate with each other using DIGI software but not to ezrobot. Baud rate for the xbee is 9600, I am not sure what it is for ez robot? The com 3 port shows in ARC but the pop-up saying there is no...
10
3 k
Jeremie |
question
Magnetic Rotary Encoder
Found this. It may be of interest to some. Thought I would post it. May can use it with the EZ-B. Quote from web site: "It uses an AS5040 magnetic rotary encoder to measure the absolute position of the rotor of whatever motor you're using. This is actually pretty exciting. Powerful servo motors are expensive, but with one of these, you can use...
2
3 k
irobot58 |