Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Bind scripts to servo moves (V1-V99); triggers on position/speed/accel changes and provides ports, positions and speeds arrays for custom control.
Featured
HEMI home-health robot prototype lifts and transfers patients using high-torque servos, actuator, sensors, EZ-B control, Sabertooth drive.
question
2 H-Bridges?
Hello all, I am trying to connect 2 H-bridges to my EZ-B. I followed the online tutorial and successfully connected 1. However, when attempting to connect the 2nd one I ran into some trouble. The...
33
4 k
thetechguru |
question
Wii Remote
i bouth a wii remote and looks the wrong one.
24
6 k
Nomad 6R |
question
Awesome Fabricator
I don't know how many user here are interested is lager stronger robots but even though this dude is not into robotics he is an incredible fabricator and fun to watch. He has video...
3
3 k
Nomad 6R |
question
What's He Doing Now?
What's he doing in the middle of the night! I also see some Roli's too! J
11
4 k
Wolfie |
question
A Homemade Power Distribution Solution
I decided that I needed to divide my power input up a bit. I have some servos that can only handle 5 volts and some that can handle 6. Most of the ones that will be running together handle 6. I decided to find a way to build a power distribution center for the 6V side. I found a board at RadioShack (cant stand that place) that worked perfectly. It...
16
7 k
bstaehling |
question
Noisy Analog Dat On The V4
I have about 5 adc units of noise on my 256 adc analog inputs. Also the battery voltage and cpu temperature are noisy. I have checked my incoming battery voltage and it is steady. I tried to filter the analog inputs but no luck there. Thanks oops I guess I can not go back and fix my typo in the title.
27
6 k
Rich |
question
Wall Wart Power
Hi there all, My ez b is here. Yeah Whilst testing I was just wondering if I could use a wall wart to power the ez b to save my batteries? The one that I have in mind is Input 100 -240V 50/60Hz0 15A Output 7V 42A Before I go and blow up my beloved ez b I thought I would check with my peers on the forum Thanks guys and girls
9
3 k
Rich |
question
Question About Servos
Ok, I don't really know how to word this question. I re-built my Sunshine robot. Her arms and shoulders were very weak. so, I replaced the servos with ones that are very strong. I setup the robots, I thought to the right positions. When It came time to test her, I started with her right shoulder. It seemed to work Strong, but, it did not go into...
7
3 k
MovieMaker |
question
Kainy Remote Desktop Android App That Is A Customizable Gamepad Controller
I was told about this app called Kainy for android phones. Its a...
2
4 k
ZionPhil |
question
Servo Position
I know this may be a dumb question. How do I setup the servos so they both go forward. I have to place my servos (see attached picture) exactly the same to get them to roll in the correct...
4
2 k
Dave Schulpius |
question
Radar Scan Control
Does the radar scan control work via the mobile interface or is it just scripting? Thanks
6
3 k
Darathian |
question
Which Ezbits Do I Need Tio Print For Six
Which servo parts do I print to make Six. I have my ezb4 n order wanting to print my own Six Which ones and how many of each?
4
2 k
slim6072 |