Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Scriptable Remote Mouse for ARC: control PC cursor and ARC window via ControlCommand, using voice, camera or I/O inputs; shows cursor coordinates.
Featured
Synthiam ARC controls Revolution JD and Meccanoid, integrates computational algorithms, laptop/wifi and custom EZ-controlled workbench for robotics.
question
Dear Ez Think Tank Help For Lift Design
Guys I am working on something and need some ideas/help to make a easy lift system. I want to raise a periscope (yes it is for my R2 unit) out...
10
4 k
mgodsell1973 |
question
After 54 Weeks Wait They Shipped
JD and Six on the way... Wednesday, October 01, 2014 Location Time Piece 5 Clearance event SHENZHEN - CHINA, PEOPLES REPUBLIC 17:09 1 Piece 4 Arrived at...
56
9 k
Aislinn |
question
Just Got The Revolution Six (Unboxing)
I just got my Revolution Six! Here are some pictures of my unboxing. I am very excited to get started with my ezrobot. Do you guys have any tips...
4
2 k
Obreto |
question
Switch Activated L.E.D
Hi all, I have been thinking about a way to add a led to the "Attck" script on K9. Now I believe I have an answer, but just wanted to sound it out. I k9's head, the "laser" was on a slide style mechanism that had a switch on each end that turned the polarity of the attached motor, that returned the slide back to the start...
5
2 k
Dunning-Kruger |
question
I See Roli On The Floor
j
11
4 k
Wolfie |
question
Linear Vs Exponential Motion?
I am controlling my B9 robot (i.e. The G-Bot) using a Sabertooth 2x25 with EZB v3. Is there a way to set the Sabertooth or EZB so my robot's motion is gradual (maybe exponential vs linear)? The G-Bot will have a rather high center of gravity when fully assembled and the way the lower half is buzzing around in my garage it would've been on its side...
4
3 k
gwen4156 |
question
Missing Screws In The Feet?
i dont know excacly howmany screws are in the foot for servo D18 and D14 i got left foot 2 screws left and right foot 2 screws diagonal?
2
2 k
Nomad 6R |
question
A Little Electronics Advice - Dc-Ss503v100 Compas
Let me start by saying that this is the part of robotics that I am very weak in. I am going to be asking some questions that are probably very simple and I know that there will be multiple answers to solve this, as there is always multiple ways to solve something in this craft. I purchased a DC-SS503V-100 because of the native support in ARC. I...
8
4 k
Luis Vazquez |
question
Break Out Sound Hack: Ez-B V4 External Sound Hack
Hey everyone! Following Dave Schulpius's tutorial for adding a 3.5mm headphone jack to the ez-b I successfully connected...
4
3 k
RobertL184 |
question
Wifi Question On Hp/Compaq
ez-robot staff listen to your answering machine... j
3
3 k
DJ Sures |
question
K9 Toy
Hi all, If you read a previous post of mine it was referance sound bites for a k9 toy, that I wanted to hack. When purchased from a car boot I found that the unscrupulous seller had removed anything of worth and cut all the wiring. Never mind. So on to the build, with a couple of continually rotating servos and a trim here and there things are...
6
3 k
mgodsell1973 |
question
Ez 2 Robot
Any new updates on EZ 2 robot? I am interested in its developement.
2
3 k
MovieMaker |