Robot Building Questions
Take control of your robot's destiny by subscribing to Synthiam ARC Pro, and watch it evolve into a versatile and responsive machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Movement panel enabling Kangaroo & Sabertooth encoder-based speed/velocity control, UART/PC serial options, tuning and encoder setup.
Featured
Betty9: a 6' tall fembot with servos, blue eye LEDs, Arduinos, EZ-B and Echo Dot, mounted to a hacked Segway MiniLite for guided locomotion.
question
3Ds Max To ARC To Stepper Driver(S) To Nema 17S
Alright, kind of a tall order but here is where I am at and would love some help or points in the right direction from the community. I'm building a machine with crazy unusual kinematics. I have 4 typical G9 tower micro servos and 13 separate nema 17's. Due to the nature of the machine, they had to be steppers ( which is unfortunately where the...
13
3 k
DJ Sures |
question
Right Ankle Servo Calibration
I am just working with the JD Humanoid for the first time today, I am able to connect the robot with my computer. Through the process of calibrating the servos,...
3
2 k
mcriscitello |
question
Using Bing Speech Recognition With ARC Speech Recognition Control
I've been having a fun evening trying out the cognitive service plugins this evening for...
8
4 k
DJ Sures |
question
Telepresence Robot Idea
I would like to have my robot be controlled over internet with a Vr type Headset. Like one that you set the phone inside. I would tie the headset phone motions to the...
15
5 k
faengelm |
question
Radar And Rgb Dont Work
i read the tutorial tree times,try all kinds of stuff.bolt rgb and ping sensor dont work.i use an original roli ARC.the ARC disconnect when trying to use one of the rgb,got 2...
16
3 k
Nomad 6R |
question
Newbie Needs Help With First Robot
Hello, I've never posted in any forum before, so I hope I'm doing this properly. I've designed, 3D printed and assembled a robotic Gremlin using the EZB...
19
6 k
Nomad 6R |
question
Compressorhead
I saw this vid on another Inmoov site. For me, it is one of the best bot videos out there. The whole concept is wild, over the top, and just my style.
4
3 k
RoboHappy |
question
Tomy Omnibot
have in my possession a Tomy Omnibot for sale. Please contact me at 661-470-7815. [email protected].
2
2 k
DJ Sures |
question
Dead Battery
I have an AdventureBot that will not charge. Tried two different chargers and two different outlets. Tried charging for over 24 hours. Tried connecting and received a diagnostic report which showed N/A for voltage. I have a Roli and the same charger charged the battery in the Roli. I am assuming it is the battery that is bad in the AdventureBot. We...
3
2 k
bsletta |
question
Servo Shutting Off Ez-B
Hello, I have just bought some metal gear servos for the robot I am working on. When I go to plug in the servo into the EZ-B it just causes the board to keep shutting down. Is it drawing too much voltage or current? It is these two Kookye Servos: www.amazon.com/gp/product/B01I6AWBJI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
8
3 k
Steve G |
question
Compatible Ssc-32 Controllers
I was reviewing the threads discussing the use of a SSC-32 controller to add an additional 32 servo (analog) ports. My question is if there are any specific...
4
2 k
bumsteadsean |
question
Power And Temperature
I am using scripting to get power and temperature for 2 ezb's. I have noticed that even if I disconnect the 2nd EZB, my script still shows power and temp for it even though it is no longer connected. I think there may be a bug in Ez Robot. Here is my script. $cputemp1 = 0 $cputemp2 = 0 $cpupower1 = 0 $cpupower2 = 0 $cputemp1 = ((GetCpuTemp(0) *...
2
2 k
dbeard |