Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms by X,Y,Z(cm); computes joint angles (inverse kinematics), shows forward...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Use camera-detected printed cue cards (direction, pause, start) to record and run stored movement sequences for ARC robots.
Featured
Synthiam ARC Mobile Interface and Android app control a DIY Laser Pegs robot using modified servos, Xbox 360 controller support and custom scripts.
question
Sound Activated Led.One More Time
Hey guys up for discussion: I am looking to have a single .wav file trigger an LED. This is for my Gargantuan project. I’d like to have the sound effect of his cannon trigger the LED in his cannon. I want this seperated from all other sounds. I.e no other sounds should activate this LED. I looked thru Rich’s tut on using the mic, but I want to...
6
3 k
fxrtst |
question
Neural Networks
Have a look at this interesting video about AI. Notice that Canada is taking an important lead in this development. You'll also notice JD at min. 33:01. Isn't that fantastic ! Too bad they...
3
2 k
PhG |
question
Wind Speed Display
Hi All, I have been away from this site for far too long. I am currently catching up on all the great looking projects going on! Sadly, I have not had much of any time to work on...
14
3 k
Jeremie |
question
Ez-B V3 Wanted
Hi all, I was wondering if anyone had an EZ-B v3 and perhaps a camera and other sensors (i.e. ultrasonic distance sensor) that work with it that I could buy. I am running an older version of the software and it does not support the v4. Thanks, Jeff
0
2 k
Jaycee |
question
Wrong Direction Of Jd's Head
Hello, I just got this week the two JD humanoid robots i've ordered, and one of the heads seems like it screwed in the opposite direction. when i put the head in the direction such that the eyes are turning forward, the head can't lean forward because its basis it standing on is not in the frontal part, but rather relatively backward.(the vertical...
7
2 k
Chelsea |
question
Onemorequestion About Power Supply
Chào m?i ngu?i bài hát
1
2 k
DJ Sures |
question
Messaging
How do you send a PM personal message to another member on the forum please ? Regards Farley
3
2 k
Farley |
question
When Altair Ez:1 Met Softbanks Pepper Robot
Here is a short extract from the end of the Robo Sapiens TV documentary. Tony
6
2 k
Toymaker |
question
I Can't Upgrade Firmware For The Ez-B V4.X/2
Hi forum.., i bought from HobbyKing 2(two) Ezb- v4 controller and i can't upgrade the firmware. When i sellect the connect button i hear the connect sound but i can't sellect the upgrade button... Also, if i visit the web server (default is https://192.168.1.1) i saw that it's the old version.. Hope that i have explain correct my...
12
3 k
sakis33 |
question
Unable To Calibrate Adventurebot Servos
I was hoping someone might have an idea what else I could try ... So I got a brand new AventureBot on the weekend to start a simple robotics class at my school in the near future (and retiring my Ozobots). Watched - among others - the servo calibration video and followed the steps; easy enough. With both servos I get that one spot where no wheel...
11
3 k
wakon |
question
Windows Version
My school is going to buy me some EZ Robots for my classroom, however we have computers running Windows 7. The website specifies Windows 8.1 or higher. I was wondering if anyone knows what might not work. Is anyone running Windows 7 with ARC?
1
2 k
DJ Sures |
question
Learning By Example Idea
Hey guys, So I was sitting around, and started to think about those expensive robotic arms used in manufacturing. I figured I could make one with Ez-bits quite easily. My...
9
4 k
3dGuy |