Robot Building Questions
ARC Pro will give you immediate updates and new features needed to unleash your robot's potential!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Control a custom ARC robot to manipulate and solve a Rubik's Cube using calibrated arms and grippers; integrates with Thingiverse build.
Featured
Bring an Enchanted Tree puppet to life with 3D-printed parts and an E-Z-B V4 camera to animate arms, mouth and eyes.
question
New Arm Mod Jd
would this be a good idea to ad a servo more to the arm jd. original the arm is 15 cm long,with this mod it is 18 long. so a dummy servo would be good,between the legs and body. some kinda case for the two servo 's to put in. picture of dummy servo's video
2
4 k
Nomad 6R |
question
Charging Jd With A Rc Hobby Charger
Hi! Do I need to purchase the EZ robot charger to charge JD or is there a way to charge JD with an RC batter charger without taking JD apart or...
9
3 k
Zap Brannigan |
question
New Products
Hello DJ, Any updates and approximate dates for the release of new products? Ron
5
4 k
rbonari |
question
Onemorequestion About Power Supply
OK, the way I do it is to have 12V and 6 volt and 5 volt power sources. I start with my batteries which are two 12V lead Acid 9ah batteries wired in Parallel. I use the 12Vfor the motors, the 6V for the servos and the 5V for the signal sensors, etc. Then I hook all the grounds together and pull a positive wire off of each. I run the plus wire to...
0
2 k
MovieMaker |
question
Sabertooth Motor Driver On Ez Robot Controller; Using Wheelchair Motors
Hello all, I’ve been following some threads on people who are using the...
9
4 k
DJ Sures |
question
The Alternate Power Adapter Is Not Fitting In With The Power Shell
I got this product for my birthday a few years ago and still haven't been able to fit the Alternate Power Adapter into the Power Shell. I need help! confused wat?
5
2 k
DJ Sures |
question
Save Blockly Code To Ez-Cloud
I have successfully saved a project to EZ-Cloud, but it does not save a Blockly program I wrote. It seems the Blockly code is only saved locally. That limits...
5
2 k
NBCCSJ |
question
Serial
what if I wanted to control ten of those cheap dynamixel copies.(16A) and hook them all up in a serial fashion. Would I have enough serial ports on the EZB-4? I would have to assign an ID. The way they are setup, it looks like I could control them off of a single serial port. Suggestions?
6
3 k
MovieMaker |
question
Jd Dance
first jd dance,using only script.
2
3 k
Nomad 6R |
question
Can I Change Notepad Window Names?
I love the fact that you can change the names of the individual controls via the properties. Can you do the same for the NotePad windows? I don't see...
3
3 k
Perry_S |
question
Android With Usb Connection
Greetings Programs, I am currently running an embedded computer in my robot. The EZB and computer are connected via USB. Since my computer is not doing much other...
0
2 k
robot56 |
question
Google Assistant Api On Ez-B4
So I have set up a google assistant API on my raspberry pi and have set up my EZ-B4 to run the google speech recognition and port the voice data to pandora bot to...
9
3 k
Mickey666Maus |