Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
51M0n76's Meet Arnie
Homebuilt robot Arnie with pan/tilt head that looks around freely; awaiting H-bridge for mobility, plus paint and arms.
Louis's Quadrupedal Robot Xr4
Budget quadruped with 1.5mm carbon fiber/aluminum frame, 12 MG995 servos and EZ-B controller for omni-directional...
R2D2's Robot Navigator
Navigator pocket robot: aluminum riveted frame, 11.1V LiPo to 8V regulator for EZ-B, minimalist ping-sensor navigation...
Aaawwwww!!! Cute!!
M stands for the inventor
.
Hey Nomad, what is your Skype name?
hey mickey
patrick.dierckx19
Trying my first print on my new - CR-10S Pro V2 3D Printer
We will see :-)
EzAng
hi ezang
goodluck and have fun printing.
@EzAng congrats, the journey has just begun.
any pointers?
I using : The Bed Temp is 149 deg Fahrenheit and I always use 475 deg Fahrenheit for the Extruder - 65 / 135 c
I print on glass hairsprays
EzAng