Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Gwen4156's G-Bot Video
G-Bot Halloween video showcasing the robot in action and thanking collaborators who prepped him
Steve's Lynx Robot 1996? Reborn W/Ez Robot
Vintage Lynx robot arm reborn with EZB3, internal LiPo and Synthiam ARC for wireless control, Auto Position and voice...
Cliffordkoperski's Cliff Robot
Cliff robot test run showing motion without gyro/accelerometer; future sensor demo planned; affordable Oak Studios servo...
@EzAng your Hot end temp is to low it should be around 245 deg cel try the 2 test cubes and see if there are strings between the two cubes it may require a much larger retraction setting around 8mm. I never use a raft but I have been using my machine for a long time once you set the first layer on the bed right you will not need one. but for success now use a raft. testing the machine and seeing what it needs is very important.
great info thanks, I will try all of this
looking at my PETG filament - it says nozzle temp 230 - 250 C and bed temp 60 - 80 C
EzAng
ptp
i got all parts,sd card with noobs on it.the pi boots up but error message pops up. it seems that something is missing.also keyboard&mous dont work.i do see the arrow off the mous in the screen. i gess here starts the crazyness.xDany idea forgot the picture
thanks
WOOHOO found it .its downloading now.
all works.
hi mickey
zoe chest in colors german flag.black servo's&brackets/red/yellow
Supercool!! Gret to see your progress!! Its really nice that you are remodeling the design and adding your own flavor to it!! Keep it up!!
Had some time during the lockdown and made some new Oled Eyes for ZOE... For anyone being interested in making them, I will create another thread with all the info!!
Or just head over to Github... https://github.com/SwannSchilling/ItsyBitsy_M4_Oled_Eyes
Hi Mickey666Maus! Thanks for showing this. I'm loving these eyes!! It really gives it personality!