Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Gwen4156's The G-Bot (Gwen's B9 Robot Project) Gets His...
G-Bot outdoor test: handling lag and ramping issues, tips to use wireless controller and prevent tread snags, successful...
Ezang's My New Robot Hand To Practice With - Video
Synthiam ARC controls a DIY robot hand with auto-positioning via Arduino Uno; servos glued for quick prototyping
Steve's 2 Ft Biped Walking(Shuffle) Robot
Omni-wheel robot build: overcome turning and weight distribution with center-pivot knees/hips; PVC construction and...
glas bed too.and a uhu stick ??
the uhu stick is for getting the print to stick on the build plate ( glas ) and better finich,
glas bed
ok I will look into it, thanks
EzAng
Hey Nomad, how did the print come out...I am happy it worked for you!!
I made some instructions for the Head Frame, which holds the Oleds, Camera and Pi... Just to show the basic assembly!
Feel free to modify the design for ARC HDD Servos, looking forward to see your build!!
Let me know if you are running into any issues!!
mickey
still printing the head.will last till tomorrow .17 houres lol
Hi Mickey I have printed the neck parts I designed up and down right and left and I am printing the Original head slightly enlarged, as I am not using your suggestive eyes I will be using a mouth. The head has about 3 hours to go. I still have to design the mouth Mechanics, still just an idea. thanks again for giving us your files. this makes being trapped at home much more interesting.
Sweet!! So good to hear you guys are having fun!! I am really looking forward to see your ideas!!!
May the filament be with you!!