Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Other robots from Synthiam community
Rb550f's Tars Robot Concept
TARS-inspired 5ft foam-board robot simulates walking with a single servo, dual DC drive motors, lazy-susan leg pivots...
Jason's Roli Time-Lapse Video Robot
Roli time-lapse rig with printable GoPro EZ-Bit and simple code to nudge the chassis, plus a $25 film rail for smooth...
Linux's New Desktop For Modification To Installation In To...
Refurbish Emachine PC into quad-core 8GB system with 4TB storage, projector, WiFi and power brick for Omnibot 2000,...


Thanks mickey - i'm starting it this upcoming week
Hi Mickey The early head download is not working at this time.. Is it because you just listed it?
Thingiverse is sadly going down the drain...really bad to see such a good website falling apart!! I reuploaded on Prusa!!
Zoe Early Head
Great robot, thanks for all the videos, pictures...
It seems to me the JD robot can do some of this with the Microsoft Kinect,
I will try that, thanks
EzAng
Thanks Mickey I got the File, off of Prusa
@EzAng Never forget, a robot without a brain is nothing more than a bunch of servos...but we are having the power of ARC for breathing life into our creation! Now with Exoshpere the possibilities are endless!!
@nallycat Glad everything worked out now, share your progress on the remix!!
Good morning Mickey, nice yo hear from you.
I consider myself a newbie here, just learning as much as possible.
You always have great teaching lessons here, please keep it up, thanks.
side note, I have a friend here that teaches German at the Mercedes car plant.
Have any robot German conversation for him to decipher? :-)
thanks again,
If you get a chance, test my robot on exosphere.
EzAng
hi mickey666maus
does the horn holes are desame as the horns from HDD servo's,