All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Compact Lynxmotion Smart Servos with position feedback, safety features and UART TX/RX for Arduino/EZ-B v4; scriptable temp, load, load-dir and ping.
Featured
Omnibot mated to Roomba: a cleaning robot using EZ-Robot kit with camera, servos, sonar and voice for autonomous or remote-controlled operation.
question
Withs Command To Use
withs command do i need to use in mobile ARC to set the camera on or off i try motion and movement button,but camera dont start ?
6
3 k
Nomad 6R |
question
Is There A Way To Run Autorun Script On A Mobile Interface Connection?
I know how to run a "Connection Established Cmd." in the Connection Control in ARC for Windows, but can't find the equivalent for the Mobile Interface. Any ideas on how to autorun a script on conjnection with Mobile device? Regards, Frank
3
3 k
DJ Sures |
question
Linear Actuator Ezb Script
I have looked on the community and don't seem to be able to find a simple answer on how to control a Linear actuator. What I am doing is making my Tin Man robot upper body rise up or down on command. I have a 12" actuator. It has two wires. To change directions you reverse the two wires. I would like to use one half of a Hbridge motor control....
21
7 k
dbickert |
question
Jd Ezb Losing Power Connection If Bumped Or Jolted
I was very fortunate to pick up a used Six and a JD from Ebay for $350 total. The kits are in good shape. My JD robot EZB appears to be disconnecting from the battery if you bump the EZB or it does a move that jars the robot too much Is there some trick to keep it from disconnecting? Can the EZB be removed and re-seated into JD's back?
10
3 k
MarkTheBotBldr |
question
Continuous Servo
Greetings, I am trying to accomplish the following ? Get servos working from the adventure bot program. I am only able to get one working on the mobile platform and none on the ARC...
7
3 k
DJ Sures |
blog
Teach Your Robot To Dab... And More!
Dancing, dabbing and lawnmower robots for good-creative, helpful robotics and more.
0
671
question
Unix Time
Looking for script code that will convert current time to Unix time. Unix time starts on 01/01/1970. I need to know how to calculate the Unix time for current time. Thanks
7
3 k
ptp |
tutorial
Synbot Plugin Tutorial - Interface To Syn Bot Software
Install bot software, EZ-Builder Synbot plugin and example SIML project files for robot setup, plugins and...
0
50 k
Jlucben |
question
Robot Design And Control Using 3Ds Max And ARC
This thread is a continuation of Thread #9584
170
19 k
Mickey666Maus |
question
Oh Boy I Need A Little Basic Help
Hi! After a long, long two weeks of mind-draining work, both my sons sprung a - let's build a leprechaun trap using an ultrasonic sensor and a servo -...
4
2 k
DJ Sures |
question
Intermitent Wifi Connection
Hi All, having trouble with EZ-B V4 controller intermittently hooking up to wifi with laptop. I have disabled my antivirus and tried through my internal wifi laptop connection and my ASUS wifi usb adapter and will occasionally get a connection that will remain until I disconnect it. I have also tried removing and reinstalling ARC and had no luck. I...
11
4 k
Rob-bot |
question
Jd - Jerky Movement
Hi, I purchased the JD Humanoid kit four days ago. The first two days I built the robot, calibrated the servos, saved a servo profile, and started to play around with the functionality (movement, dances, Roboscratch) without any issues. I also connected through my Android device and created a profile for that. The next two days I noticed the...
3
2 k
pteisseyre |