All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Deprecated: reads latitude, longitude, UTC time and speed from ublox NEO-6M GPS; auto-inits UART0@9600, shows processed and raw data.
Featured
Sunshine robot returned - 4.5 ft tall (6.5 ft arms up), Version 1 with build and wiring photos; community-supported, ready for software tuning.
robot
Bob's Although This Isn't A New Idea
Add flight capabilities and animal-inspired designs to robots to expand functions and engage children in robotics.
0
2 k
Bob Lee Swagge… |
question
New Sensor P.I.X.Y Camera
i found this really fast camera. new camera
10
5 k
theenggproject… |
question
Wiimote Question
Hi, I ordered a WiiMote Motion Plus and found out after the fact that it is incompatible with ARC. This is stated in the tutorial. Is there a work-around? From what I see on Amazon all of the WiiMotes are Motion Plus except for a couple of used ones. Tom
10
3 k
tom.caine |
question
Ezb4 Controller
Which power supply portable or ac adapter that I can use for the ezb4 controller? MC....
2
3 k
CardboardHacke… |
question
Camera Image Freezes
Camera Disabled Camera Initialized: EZB://192.168.1.1 @ 160x120 EZ-B v4 Camera Error: System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond....
4
3 k
camech |
robot
Redzone's Gideon Inmoov
Redesigning Gideon's lower body using four EZ-B v4 controllers to separate body parts, relearning commands and crediting D Cochran's idea
7
4 k
Jim Milan |
question
Accessing Engenius Eap350 With More Then One Ezb
On the advice of fellow members of this forum I bought an EnGenius EAP350 a while back. The thinking was to give my EZB an access point with a stronger signal to access then my network's wireless router. It worked like a charm. Here's my question; I now have 3 EZB's in my robot and have noticed that only one is using the EnGenius EAP350 as an...
3
3 k
Nomad 6R |
robot
Darkangel's They Need To Make Robotic Rept
Robotic frogs and lizards would thrill kids-playful robotic reptiles for imaginative family fun
0
2 k
DarkAngel |
question
Digital Pins Not Working
All the digital pins on one of my 3 EZB V4's stopped working. I rebooted and reset the unit and still can't get the 3 volts at any of the digital pins when I try to turn them on through ARC. I probably burned something up on the EZB but was wondering what type of mishap would cause them all to stop responding? I'm a little leary to just swap out...
5
3 k
Dave Schulpius |
question
Lekrunda Right Leg
right leg middle servo wrong way.head not in the middle
0
2 k
Nomad 6R |
question
Ez-B V4 Disconnects Whenever I Try To Move The Servos
i am working on making a custom six robot that I am modeling after the Ez Robot six robot, I am running 12 servos of of 5 rechargeable 1.2 volt AA's, I have already set the battery monitor to 5.2. The servos I am using are 3 EZROBOT HD servos, 3 Tower pro MG995 hi-speed servos, and 6 GWServo so3 STD servos. what happens is I connect to the ez-b...
4
2 k
AndrikJ |
question
Commotion Motor Driver / Mecanum Wheels
I've been having a look at the ComMotion motor driver as an option to drive two motors much like a Sabertooth. With the onboard encoder counting, it should be possible to create something via serial or i2c that acts like a Kangaroo. My thought is that I could later get two more motors and some omni/mecanum wheels in the future for another platform...
3
3 k
leversofpower |