All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Adds a Personality Forge chatbot to ARC, giving memory, emotions, AIScript dialogue, persistent conversation IDs and speech/chat integration via API.
Featured
Localize an EZ-Robot AdventureBot with Intel RealSense T265 and Synthiam ARC NMS, waypoint navigation, SLAM prep, lidar mapping and pathfinding.
question
Inverted Pendulum
Hello to DJ and the staff, Is there any updates on availability for the Inverted Pendulum? Ron R
10
4 k
Andy Roid |
robot
Xojins's The Sentry Bot From Fallout 4.
Sentry Bot patrols your house at night, uses Insteon or IFTTT to control lights and appliances, and streams live video of detected motion
0
2 k
xojins |
question
Hardware Upgrade
hi i'm new to the community. Just have a quick ques. if I purchase thesix hexapod robot kit will I be able to upgrade to the JD using the existing parts or will I need to make a new purchase
7
2 k
jj68 |
blog
It's An Ezrobot Christmas!
EZ-Robot wishes happy holidays and hopes 2016 brings you more robots
0
649
question
Great Deal At Makershed The Dynamixel Xl-320 $6.49
I believe these are supported within ezrobot. The DYNAMIXEL XL-320 is a robot smart actuator with a fully integrated...
0
3 k
Chiefavc |
question
Rgb Ghosting?
Today I started work with my new robot parts, one of them being the RBG led array(JD's eyes). In the animator, I set one side to light up and the other not to, but for some reason the other side...
4
3 k
DJ Sures |
question
ARC And Go Pro
Hi, I noticed that the "No DLL's found in the waterfall procedure" has come back in the later versions if Go Pro is installed. Has this bug been reintroduced? I know that I can fix this issue by deleting files but I thought this had been fixed in the ARC software itself. Could somebody advise? Thank you and Happy Hoildays! Akhila
4
2 k
DJ Sures |
question
Please Help
My Ez robot six is not connecting to my phone or it will connect then will disconnect and my speaker has stopped working
3
2 k
DJ Sures |
question
Servo Causes Program To Freeze
I am doing speech and "robot move forward" and the servo runs but then I can't shut it using the servo control and the ez program keeps freezing on me. When this happens I get the message "I have successfully connected to your network" and why this is resetting, I have no clue. Anyone have any ideas? Also the program keeps...
4
2 k
Dunning-Kruger |
question
Controller Stuck In Client Mode
I unboxed a new hexapod kit yesterday. It was working fine until I switched from AP Mode to Client Mode. Now the controller is stuck in Client Mode and will not reset. (Note: Performance was herky-jerky in Client Mode, so I wanted to switch back to AP Mode where it ran smoother.) I have pressed the reset button on the controller but it does not...
8
3 k
vsljoe |
question
Specific Recommendation For Power Adapter
Hello, I made the leap after a fair amount of research and bought an ezbv4 last night. My initial application is static so I deferred...
30
8 k
Redzone |
robot
Rickroush's My Idea Is To Resurrect An Old
Resurrect Robonova bipod: replace RS-232 with WiFi, control 24 servos via back-mounted controller and site software to help other owners.
0
2 k
rickroush |