All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
EZB UART parser and Serial-TCP bridge to connect EZ-Robot cameras via Teensy USB, enabling ARC camera control and USB-to-serial bridging.
Featured
Spy Robot completed and showcased at a school science fair, credited to DJ Sures; photos and Spanish materials from Ecuador.
question
Hc-Sr04 Ultrasonic Distance Sensor
does the HC-SR04 Ultrasonic Distance Sensor that came with the v3 developer kit work with the v4 or does it need a voltage regulator
15
4 k
RR333 |
question
New Member With Wheel Building Question
Hey folks! Used to try to build bots when I was a kid. I had a few successes, but mostly kludged up messes. Anyway, my wife bought me a few books because I am now disabled and can't work anymore. Hips and back are degenerating. I am building a mix of a bot from a few different books, and some of the parts I want to make myself. I want to build the...
7
3 k
JustANerd |
question
Controlling I-Robot Create 2 With ARC Roomba Movement Panel?
I disconnected the servo from D0 on my Adventure Bot and connected GND on D0 (Black Pins) to Pin 6 on Create 2 connector (GND)-(Pin 7 also a GND pin on Roomba). I connected D0 Output (White Pins) to pin 3 on Roomba (Receive Pin). The Create 2 communicates at 115K Baud as does the newer Roombas. I tried checking the "use old protocol" and...
7
4 k
rbonari |
robot
Rainbow's I Want To Make A Biped, That W
Roaming biped sentry robot for night patrol and intruder scanning, with shoulder-mounted 410 gauge barrels or mini flamethrower defense.
0
2 k
Rainbow Rogue |
question
Two Questions Regarding Rss Feed Scripts
Hi guys. I need a little help with an RSS feed script and hoping someone can point me in the right direction. Question one. Is there a way...
43
9 k
jetpilot96 |
robot
Luis's Lcd Display For Ezb4 - Using Arduino Mini As Controler
Connect a 16x2 LCD to EZB4 via Arduino: wiring, Arduino sketch and EZ-Builder UART script to...
28
14 k
ubergeek |
question
ARC Client Connection Question
Hi, I'm having trouble talking to my JD in client mode. When I power him up he says "connected to network" When I connect through my browser I can connect and the buttons work When I connect in ARC I get "Attempting connection on 192.168.0.10:23 Connected to 192.168.0.10:23 Reports EZB v4 OS With Comm 1 EZ-B v4 ID:...
9
2 k
thetechguru |
question
Omnibot 2000 Tires
My Omnibot 2000's tires are completely gone, I don't even have any to make a mold of, does any one here have any I could purchase? Or know of where I can replace or buy them? They don't have to be the stock tires, just something that will work and hold on to the wheel. Thanks.
12
5 k
ubergeek |
question
Omnibot 2000 Wheel Tread.
I was wondering who can make me some tread for my omnibot 2000 drive train, I need tread for a 4 wheels. Another question is, what other wheels would fit, if I wanted to swap the wheels out?
4
3 k
ubergeek |
robot
Pim's I Would Like To Finally Finish
Finish biped Pete build with the ez-robot platform, making hobbyist robotics accessible and inspiring others.
0
863
PiM |
robot
Akhil's A Robot Can Send Echoes And Re
Robot sends echoes to recognize objects, identify what's ahead, and measure distance.
0
938
Akhil |
question
How To Stop A Moving Servo
I'm learning how to use EZB scripts. I'm doing a very simple exercise. I make a servo move , and want it to stop it as soon as a sensor makes a digital input high. I'd want to see how long it takes to actually stop. I use "release" to stop it (it's a digital servo, it will keep its position even with no signal). I see no other script...
20
7 k
leonardo46 |