All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control LewanSoul LX-16A servos via ARC (EZ-B v4/IoTiny): assign virtual ports, read positions, set speeds, and enable continuous rotation.
Featured
MOSHI mobile robot ex-Hero JR with Omnibot drive, VEX controller, voice commands, AM/FM & Bluetooth, servo head, 12V+6V batteries, awaiting EZB4
question
Servo Question
I have assembled my JD Humanoid Robot. When I connect to him, one of the servos makes a buzzing sound and won't stop unless I turn it off. For instance, the servo was the upper part of the...
9
2 k
drebant |
robot
Turbotom's I Plan To Build Security Robot
Security robot detects and tracks motion and includes an integrated airsoft turret.
0
825
TurboTom |
question
Can't Configure Rovi As A Wifi Ap
We are trying to reconfigure the Rovi to be a Wifi AP. We can connect to the Rovi via my router, we can access the Rovi's configure pages, both from my PC and my tablette, we can apparently save the "EZ-B Wi-Fi Access Point Mode Configuration", we then reboot the Rovi, either using its power switch or the reboot option from its Diagnostic...
10
4 k
DJ Sures |
question
2S Lipo Vs Servo
First I like to say that i'm very happy with your products But here we go A fully charged lipo puts out 8.2 volts and the servo's that are in the kits can have max 7.4 volts. I used in my projects cheap towerpro 995 servo's and a stepdown regulator to put out max 6 volts because if i put the full lipo voltage on them they begin to smell funny and...
2
3 k
ed_eilers |
question
Hb25- Initialzing Via A Power Cycle
I have had a little issue with using the Parallaz HB25 motor controllers I use with "Cy". Maybe someone could shed some light on this. It...
18
5 k
ptp |
question
Revolution Jd Connection Questions
Hello, I recently got a F-31 Revolution JD robot kit. I put the kit together and verified all the servos are connected to the correct ports on the...
6
2 k
jglavin |
question
Camera Grid Lines
I find when using the Camera, the grid lines change or fail to stay as set. I try to save the set locations of the lines, but when I reload the project I have to reset the grids again. Thanks, Ron
16
4 k
Andy Roid |
question
Face Recognition, Age, Gender And Emotion Sensing Video
Here is a video of the Face Recognition, Age, Gender and Emotion Detection system used on the ALTAIR Robots...
7
3 k
CochranRobotic… |
question
Script Question
Please have a look at this script. Will it run all the way through or will the Halt() command in the first "if" statement cause it to stop before it gets to the "Elseif" section? Thanks for looking. if ($ADC_Lft_Elbow => 160 )#160-350 is in Centered position $Lft_Arm_Centered = 0 #Reset varable 1=not cnetered, 0=centered...
12
4 k
DJ Sures |
blog
Six EZ-Robot Hexapod Color Tracking Red Ball
EZ-Robot Six Hexapod tracks a red ball using EZ-Builder software, showcasing precise object tracking and responsive control.
0
751
release
Windows Release 2016.01.30.00
MPU9150 (All-In-One) sensor update
22
7 k
thetechguru |
question
Looking For Stl Files To Print
Hi, I am trying to find a download point for the STL files to make the servo mounts for a JD arm servo? Anyone point me in the right direction? Thanks Paul
6
3 k
DJ Sures |