All Community Content

Ez Script Servospeed Command Broken?

Using ServoSpeed(D#, 50) or any value between 0 and 50 isn't having any affect on the speed of my servos. I have tried grouping all of the ServoSpeed() commands at the top of my script and using them right before each Servo() command without any change. I am using a mix of the Hitec analog/digital and the Futaba 3003 (included in the ez-b kit)...

Ps Vita!

Here's an interesting idea! it would be pretty cool to be able to control the ezb with the New Playstaion Vita. It has two analog joysticks, accelerometer, gyro, micriphone, wifi, bluetooth standard playstation controls, front and rear cameras, touch screen and a rear touch panel. there are endless things you could do with all this input and a...

Microsoft Lifecam Hd-6000 Issue

Hello to all. I have just bought a Microsoft Life Cam HD-6000. As a web cam, it works supper. I can zoom in and out with no problem. When I use it in ARC, it so far zoomed in its almost unusable. I can be 10 feet from the cam and my head fills the window. So tracking any kind of movement is impossible due to the tracking window is full of an image....

Multiplexing Digital Ports

Hi Guys Is there anyway to 'multiplex' the 20 digital ports?. I want 6 columns and 14 rows to drive an LED dot matrix using row column addressing. Any thoughts would be greatly appreciated. Thanks danUK

Power To Ezb

No Problem with my EZB works perfectly I supply do to d14 with an external power source,by initially cutting print on pcb when I disconnect main power to ezb and bluetooth red led goes out but the green led remains on is this normal don't want to do damage this brilliant card Pat

Connection Keeps Dropping

Recently got 'Gerrard' my Butler Bot (get it?) up and running after a recent spot of upgrades and noticed that the Bluetooth connection drops regularly after a minute or two. Which it didn't do before he would quite happily sit there for hours watching the TV. I have a Ver 2.1 board fitted saving the my V3 board for another project. Also get...

Com Ports Dropdown List In ARC And Firmware Updater

Hi All, I apologize if this has been posted with a solution but I could not find it in bugs. I noticed after the IP capable version of ARC came out (awesome btw) my COM Ports showed up in the pull down a little strange. Where I had COM6 before, I now had COM16 showing. The COM port was verified as COM6 with the OS and I was able to key in COM6 it...

Is There A Schematic Or Block Diagram For The Ez-Board

My subject is my question, I was wondering if there might be some documentation on the EZ-board in the form of a block diagram or a schematic. I am interested in the 3 Regulator and there appears to be a fuse between 2 of them. From the hardware manual I gathered that one of the regulators is one amp and that is probably for the micro and the...