All Community Content

Ar Drone 2

Hello from Nova Scotia. I've been watching for an update to EZ that would handle the new AR Drone 2 as well as the video from the Drone. The new SDK for the Drone 2 has been released so I'm wondering if there are any plans to update to accommodate the Drone 2? Your software seems very well thought out and offers a million possibilities and I could...

Rock Paper Sicissors Robot Never Looses

www.wimp.com/winrate/

Going For A 1/16 Tank Base For Robot - Pro's And Cons ?

After messing around with Servos, Cogs and home made tracks for "Bob" the last 2 weeks I've decided to give in to the idea of a RC 1/16 Tank Base. I was impressed with Dogbots mobility and they seem to have a low centre of gravity and move pretty good outdoors."Bob" weighs about a 1 kilo so I'm guessing it should be able to move...

Question With Color Tracking, Motion And Face

I am trying to get color tracking working. It has no problem what so ever seeing the red ball. But from the robots viewpoint, when it sees it, it goes to the Right and all the way down. Everytime. To the right and down. Please help. I am loosing patience with this. It is NOT D.J.'s fault. It is mine. I have tried Inverting and such. It is as if it...

Creating A Windows Phone App.

Hey I need some help. I have a windows phone and would like to control my robot from there using the bluetooth. Can any one help me out???? confused confused

Continuous Rotation Sevos Movement Panel

Every time I use the continuous rotation servo movement panel in the EZ-B the continuous rotation servos go the opposite way. Is that normal? confused

Selecting A Servo For A Project

here is info i am using for many years for my robots off the servo city site Servo power is stated as ounce-inches (oz-in.) This is the maximum amount of power the given servo will apply with a one inch arm. For example, if a servo has a power rating of 16 oz-in, the maximum amount of power it will be able to apply with a 1" arm will be 1 lbs....

Using Continuous Servos As Drive Power Polulu Power Hd 240 Oz On Servo

Ok so I'm thinking of ideas like using servos for drive , mostly because they are easy to replace or upgrade , and I already need to cut out the bottom of Jarvis base to fit the vacuum power head. If I did one servo per wheel that's 480 oz in torque per side. Is this enough to scoot around a 50 pound robot? On carpet? I do have the option to use...

Please Help Download

I tried to download the EZ-SDK but once I downloaded I had no idea what to do. Can you please help me? I am so confused. confused