Topic about 3d printing. How to start with 3d printing.
By Nomad 6R
— Last update
Other robots from Synthiam community
Zxen's Robomannequin
This is Eve. What do you guys think so far?
Rb550f's Android Palbot
Here is a replica of the famous Android Palbot. It has a Brookstone rover for mobility. Ez robot to control head and...
Rentaprinta's First Real Video Of Hansi - Inmoov With...
Here is the first interesting video of my Hansi. With working Head and Torso ( and of course with Neo Pixel Rings)
The most common nozzle size is .3 or .4. The nozzle is where the material comes out of the extruder. The bed is where the parts are built. When using PLA material you can print on painters masking tape. ( the brown or blue uncoated tape. You just stick strips side by side until you cover the bed.) There is no need to buy special stuff. (Stickers) By using the tape allows easier clean up and helps prevent the scratching of the aluminum heat bed. It also helps the parts adhere to the bed. It is best to start with PLA when you first learn how to use a printer. No need to use the heat on the bed. If you look at the picture I sent, you can see the tape I used. Heated beds are used for ABS and other materials. A need feature for the future. For now you would use PLA to learn. Really check rating of printed you look at. Some are good, some are a waste of money. Good luck. Wow the prices are high. What does the one look like?
i found one on ebay.same as yours .132 euro .due to shipping and customs is it alot more.but duable. the prize 279 is here in belgium.as you can see is belgium ridiculous expencive country.
What is the prices for printers in Belgium? Are there any other Manufacturers in Europe or Belgium? Customs cost are terrible.
the prize 279 is for same printer as the one you bouth.there are others but the prize stays high. i even had a conversation with the shop i normal by stuf and tell them about the diff in, prize for same printer.they could not do anything.i am better off bying us,usa,uk.
How much is a 2.2 kg roll of PLA filament white ? Cost from Germany or France the same ?
pla white 2.3 kg
some 60 euro + shipping comes from holland.
1 kg roll looks ok. 28 euro. Always check reviews. 2.3 kg rolls were not good.
Let me know your plans. I hope you find something that will meet you desires.
you teach me alot.
i did a bid on the printer from ebay,same as yours.cant see if its version 1 or 2 is.
i figured that 2.3 kg rolls would be to heavy to pull in the filament and the weight on a small printer.
do you use a kinda chield arround your printer?