Topic about 3d printing. How to start with 3d printing.
By Nomad 6R
— Last update
Other robots from Synthiam community
Intellamicrorobotics's Meet @Arti_Robot
My robot friend aRTi began from about 20lbs of PLA. aRTi is a work in progress. I built aRTi to learn. There is a future...
Ezang's Happy Crawler 5/18/2021 And New Combination Robot...
Metal legs adjusted to walk A short Video for now, Servo City Parts, 4 servos, ARC programming - IoTiny, Battery,...
TKOMNI0205's New Here
New here! Hi my name is Nick. Ive been following EZ Robot for quite sometime now. I own both Robo Quad and two Omnibot...
I load from my computer to the card then plug the card in the printer. I assume you can load right from the computer to the printer if it has a WiFi connection. One of my other printers has WiFi but I never used it. I keep my fles in the computer file and only use the card for the printer. I erase the file on the card when I am done.
hi andy
yes i has wifi
Nice, so you can use any of them. This is the newer version of what I have. You should have good luck with it. Now you can make all kinds of parts for your Jd and other robots.
filement roller for monoprize mini
there is allreddy a version 3 too.the version 2 has some issues whit using heated bed and heated printhead at same time. atleast thats what video's says on you tube.also the air flow on the fan seems to be a little small.but i gess i need to find, out what is and what is not.i do know i am very eager to see a 3d printer haha lol.i found this in thingverse a roller for the , filement.see link good for testing.
first part arrive filament ABS,but not for now. i just consider i can use a usb cable too consider security problems maybe? but i need a cable from 15 meters long,would that be an issue a cable so long? cause my pc is on the other side of the room.
Use the sd card that comes with the printer. It is very easy. In fact there is a copy of the two programs you need on it and a sample file you will run to test the machine. No need for cables or anything else. Just follow the instructions in the book or go online. You plug in the card. Turn on the machine and go.
As far as the roller, I have had no problems with the machine as it is. The filament feeds well. I suggest you run the test stl and see how it runs. My machine had 2 test files, a cat and an elephant. The sample filament is to short to complete the sample but you can see how it works. Once you get your filament you can print the whole sample
i will recieve today the pla blue 1 kilo.:D indeed print straight out the box.i have grey filement on its way too. and two pla white .i go for the elefant.