Topic about 3d printing. How to start with 3d printing.
By Nomad 6R
— Last update
Other robots from Synthiam community
Cardboardhacker's Mtr(Mechanical Tracked Robot)
MTR first version showcasing initial tech features with planned improvements and upcoming enhancements
Ezang's 3D Printing Again 7/18/2021 - Detecting A Sound File...
Mr. Metal returns - audio may be low; increase volume and leave a comment for EzAng.
Rb550f's This Iq My Personal Robot
IQ proof-of-concept robot: 4.5ft with telescoping camera head, Windows 8.1 chest tablet, EZB4 client mode, servo...
I haven't got it for this printer yet. It will be a little smaller. It has to allow access to the screws to level and adjust the heat bed. Once I put the glass on the bed and adjust the level I put the blue tape on the glass for pla. Or for abs I make a mix of scraps of abs and acetone. It ends up like cream. We need to talk about abs before you try it. Maybe by Skype.
klamps
i see people using klamps for mounting the glas on the bed.i will defenetly start with pla.if i have all the parts, we can do skype awesome thanks.
Send me a picture or web site of the printer when you can.
printer i bouth it on ebay,new in box never used.
It looks like the version 2.nice
Yes its a version 2.and good prize too .is yours connected thru usb cable or wifi?
Mine is a version 1. I use the SD card. I could also use the USB. On my other printers I also use the SD cards so it is the easiest way for me. I keep my other printers in a different room. The new I keep in my office so I can make sample parts quickly. I also plan on mostly using pla on this machine, and abs on the others.
so all your stl files go on a sd card if i understand you?