I've always wished I had started a Project Showcase type of thread when I started running my InMoov robot with EZ-Robot. So I'm going to start one now. The first few posts are recaps of the threads I've done, I'll put a link to the original thread so if someone wants to see the discussion they can. Anything I do in the future will be posted on this thread.
Here's the first thread I posted with my InMoov running on EZ-Robot. Original thread - https://synthiam.com/Community/Questions/6670
By bhouston
— Last update
Discover more robots
Ezang's RGB Arduino, Python Code With ARC
Control Arduino RGB LEDs via Synthiam ARC serial monitor with Python code; ask a color and watch R G B light up.
Mickey666maus's BLDC Control Odrive-For-ARC
Control Tarot 6S 4108 KV:380 BLDC motor like a servo using ODrive and Arduino with Synthiam ARC for closed-loop position...
Rb550f's Tars Robot Concept
TARS-inspired 5ft foam-board robot simulates walking with a single servo, dual DC drive motors, lazy-susan leg pivots...
This thread introduced the new eye mechanism I designed for InMoov. Original thread - https://synthiam.com/Community/Questions/8485
I modified the pistons in the stomach so it move faster. Then I redesigned the whole stomach so it could lean forwards and back. Original thread - https://synthiam.com/Community/Questions/8488
I got playing around with modifying the hands on InMoov. Original thread - https://synthiam.com/Community/Questions/8629
This is a video about the flexible joints I made for the original InMoov hand. The STL files for it are on Thingiverse. https://www.thingiverse.com/thing:2379548
Here's a couple of plates it put together for InMoov's back. The STL files are on Thingiverse. www.thingiverse.com/thing:2796925
Thanks for putting it altogether Bob. It has inspired me.
How long has your bot been running Bob? Seems like I saw it before I even owned a printer.
Geez Bob - when you put all the videos together like this, it's mind blowing to see what you've created. Amazing! Truly remarkable - thanks for sharing