Robot Building Questions
With Synthiam ARC Pro, you're not just programming a robot; you're shaping the future of automation, one innovative idea at a time.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Men's High-top Sneakers
Cyborg fashion sense has no limits! These extremely comfortable high-top canvas sneakers are made to last and to impress...
Featured
Soundboard v2 (PC)
This Soundboard will play MP3 or WAV files out of the default sound output device on your PC. Scripts can be added to the timeline of each...
Featured
Revolution. The History Of
I created this thread in the Project Showcase because, well, it was once a project... and now it is a company. Id like to tell you a little...
question
Adc Value To Servo Movement
Hi all. I am trying to get my ADC values to move a normal servo. In this project a potentiometer will move a normal servo as in if at 2.5v the servo is centre. If 0v it will move to 1 if 5v it will move to 50 and so on. Please bare in mind I do hard ware, coding even in this simple way is tough for me. Thanks all. Matt
3
2 k
artchas |
question
RGB Animator Working Now With New Version?
Not working? Now it works, Thanks - EzAng
3
2 k
EzAng |
question
Audio, Servo Movement Panels Are Only On Connection 0 ?
I noticed audio and the servo movement panels only work on connection 0 ? I also use connection 1, and...
2
2 k
EzAng |
question
Relative Servo Error On Connect
Hello... ... I had the mistake for a long time and was looking for it: Many of my servos moved uncontrollably when connecting! (different lengths, different random movements) At some point I noticed that the error occurs with all servos that are connected as relative servo! If I delete the relative servos and control them individually (horizontal...
10
2 k
Knusel |
question
Irobot Roomba Movement Panel - UART Connection Issues
Hi, I am trying to use the Roomba Movement Panel, however I have some issues. It is very frequent that the panel is disconnected from the UART port, when I use it directly or through scripts. When the Sensor Streaming is active, I have the following error in the Movement Panel console: System.Exception: Missing data. Expecting 80 bytes à...
7
2 k
fredebec |
question
What Is The Best Hardware For Synthiam Now?
I have been rethinking this company as they evolve. I see a trend to supporting other hardware platforms which is awesome. I always just associated the software with the EZB project. So as the software morphs and has been doing, what is the best optimum hardware to run it on now? Is it still EZB or Raspberry Pi, or Arduino, or whatever? What if I...
20
3 k
WiinterU |
question
Equivalent Of Ezscripts Sleeprandom(A,B) For Python ?
Hi, I used to use a lot SleepRandom(a,b) in my EZ-scripts to simulate random behaviors. I dont find the equivalent...
8
2 k
fredebec |
question
How Do I Set An Output To Reflect The Status Led Of Iotiny Or Ezb-V4?
I see a lot of questions about LEDs but cant find anything on how to connect a LED...
5
2 k
Steve Thurston |
question
Balancing A Robot On 2 Wheels (EZ Boxbot)
Hi, I saw the EZ Boxbot video done with the EZB V3 and I saw that it balanced with 2 wheels that were flat and and short and I thought...
12
2 k
ptp |
question
Is/Are There Compatible Cameras For The Iotiny
Is the IoTiny compatible with any other camera device on the market? I own two EZ Robot cameras and need to order a third, but the places the online stores where I generally buy my gear are out of stock. Id like to get started rather than wait for however long it may take for EZ cameras to be back in stock? Any suggestions? Thanks. Scott
4
2 k
robo rad |
question
Sabertooth Movement Panel And A Kangaroo X2
Will a Sabertooth Movement Panel work through a Kangaroo X2 when its attached to a Sabertooth Motor Controller?
9
2 k
DJ Sures |
question
L698 Motor Control Alternatives?
Ive used the L698 motor controller with IoTiny for a few projects, but its form factor is a bit big and has a somewhat awkward design. As I continue to be a...
18
3 k
ggr_scott |