Robot Building Questions
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
"I build robots" Hoodie
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot agent with vision, speech, motion, animations, memory, and multi-step task...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Legacy iRobot Discovery and 4xxx control via EZB software-serial (D0), supports Arduino/EZ-Robot, adjustable baud rate; not for hardware UART/USB
Featured
EZB 4 in MOSHI droid: aluminum internal frame, Sharper Image drive base with quiet 4-inch wheels, Bluetooth audio and powerful, reliable drive.
question
Did I Burn Up My Hbridge?
Well, I spent the afternoon wiring up the 2.5 amp H-Bridge I bought from the store here to my dc motor. The motor pulls about 1 amp and runs on 24vdc. So, needless to say...
4
5 k
Dave Schulpius |
question
Object Reference Error
Hi every one, since I updated ARC, each time I start a project I get an error message saying unable to load. Reason: Object reference not set to an instance of an object. And some of the change made to the project no longer saved. For example I would put a camera device on the project, save it, but when I reopen the project it will not be there....
11
3 k
nicolson |
question
How Long Does It Take To Process My Order?
I bought an EZ kit about a week ago and it is still processing my order? Does anyone know when it will be delivered to me? P.S. I live in Washington DC.
20
4 k
rbot993 |
question
Moving A Servo In A Goto Loop
Is there any way to set a servo value in a loop without running it in another script window? When I try to set a servo value in Goto loop, it only runs once. When I use multiple windows, the servo doesn't always update to the new value. Here is the script from my main window, it takes a potentiometer value, does some math, then starts a window that...
4
2 k
DJ Sures |
question
Powering The Ezb With Dual Usb To Barrel Jack?
Hi Guys, I'm going to build my robot autonomous and looking for power solutions IE one power supply for the PC so the EZB can be powered through USB. This is what I'm thinking. www.newegg.ca/Product/Product.aspx?Item=N82E16812161003 www.newegg.ca/Product/Product.aspx?Item=N82E16812200699CVF
3
2 k
Gunner |
question
Multiple Movment Panels
hey dj i want the movment panels to have board control so that i could connect 5 ez-b and control each one alone also i want to be able to select which movment panel the joystick use and the camera and the command forward() to have a parameter of which board it uses
9
2 k
ahmed eshra |
question
A Little Mistake!
Hi, I received my kit and I have been loving it...until I slipped a bit and blew one of the 220uf 6.3 capacitors (Thankfully I had my safety glasses on because the cap rocketed off). The board is still functioning but I want to swap the capacitor. My local shops only carry a 220 10v and I was wondering if that was an acceptable solution or should I...
10
2 k
DJ Sures |
question
Video With My Question
Hi dj. Can I send you a video with my connection problem? I think it is better to describe with video. Can I ?
1
2 k
jstarne1 |
question
Sound Detection & Feedback
I'm looking for a way (shield) to track sounds at any spot around, like when I try to talk then it will identify the source (direction) of my sound. in other word,...
3
2 k
jstarne1 |
question
Help With The Camera Tracking
i need to know how to make xml objects so that the camera can track
0
3 k
ahmed eshra |
question
First Time Here And A Few Questions
I got the EZ-Robot kit. Can the EZ-Robot board operate independently of the computer after programming it? Which motor driver should I buy for wheelchair motors? Are the servos from Vex Robotics Kit compatible with EZ-Robot? They either run too slow or don't run at all. What's the maximum voltage of the power supply that is plugged into the...
10
4 k
irobot58 |
question
Ez-Robot Kit Shipping
I have emailed Ez-Robot about my order # 10-1885 on 5/10 but did not receive a reply. It status is still new order (toady is 9/10). I selected xpresspost USA hoping it will arrive before 12/10. Anybody has any idea how long it will take to arrive. i cannot find any options in the orders page even if i wanted to cancel the order, there is not...
12
3 k
jstarne1 |