Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Hector SLAM-based ARC navigator that maps with lidar/depth, saves waypoints, plans paths and autonomously navigates while avoiding obstacles.
Featured
5.5ft humanoid walks, talks-56 servos on 3 EZ‑B v4 boards via WiFi, two batteries, onboard PC; Synthiam ARC scripting & biped gyro control
question
Neck Servo
hi all.would this be a great neck servo for jd.it can move left /right up and down and, also sideways . sorry cant help it.
2
3 k
Nomad 6R |
question
Ar Drone 2.0 - Can't See The Camera Video Stream
Hello, I'm trying to play with the ARC software (2012.06.20.00) and my new AR Drone 2.0 robot. I was able to use the movement panel to control my robot, however I do not see an image coming from the robot's camera. I do see the AR Drone option in the camera control Video Device dropdown (after I connect to my robot using the movement panel),...
10
4 k
Rich |
question
Slide Script Help
So Im trying to use use a slide script. I have the variable setup as $RightPWM. If I want to make another script that uses that variable to set the pwm how would I do that? Aka $RightPWM= 5, I want the pwm to change to 5. How would I do this? If statement? Not sure how I would make it.
7
3 k
Rich |
question
Engineering Area Live 2-1-2014
I see the cameras are working for me again. I also see the printers are working in the Engineering Area. I wonder what they're printing? Any one have any inside...
10
4 k
Antron007 |
question
V4 Audio Question
I was wondering if you will be able to connect an external speaker or connect to an external applified system via any type of port on the V4 like on the SparkFun? Thanks in advance.
2
3 k
fxrtst |
question
More Robosapian Commands
I think @DJ will have the answer for this question... I want to create more commands for the Robosapian then the 26 listed in the ARC Script Commands. Can the for instance, "SendSerial(d1,9600,0x04)" be sent to the Robosapian's IR connection points ? I understand the clock speed is 1/1200 of a sec and 4/1200 of a sec as per...
2
3 k
irobot58 |
question
Will This Work Whit Ez-B4
is there room in the chest off jd for this.and will it work whit ez-b4 blush kitt
4
3 k
Nomad 6R |
question
2 Pwm Movement Panel
I didn't have time to check but I'm pretty sure that the custom movement panel doesn't have 2 pen sliders that the 4wire 2pwm hbridge control has. Is it possible that dj could put this into ARC ? Somewhere along the lines of 2 pwm custom movement panel? Thanks, Tech.
3
3 k
DJ Sures |
question
Access To Ez Bits To3d Print
Hi, I would like to know how to access the files of another user to print their 3d ez bits Basically I want to get Nieks Rollie to JD adaptor. I can access the...
11
4 k
Niek |
question
Birtdayquestions^^
Since I became old today (30) I decided to finally ask some questions that I wanted to ask since a while. Solving the first good intent in the new year of life^^ 1.) Is it still possible to build your own kit? Already ordered the developer kit, but I will probably only need heavy duty servos all the time. Cant find the following: "Under the...
7
3 k
CardboardHacke… |
question
Jd Soccer Mode
did anyone try this .jd soccer mode.
2
3 k
Nomad 6R |
question
Ezb 4 Status Update On Orders Page?
Would the powers that be put blurb on the orders page of the current status of the EZB 4? https://synthiam.com/Orders.aspx Or put a EZB 4 status link in the menu area next to Community Forum, EZ-Robots, EZ-Cloud, 3D Printing Community, EZB 4 status update? That would likely save time from people asking over and over again, and my having to search...
1
3 k
Rich |