Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Send web-triggered IFTTT events from ARC/EZ-B: configure Maker Webhooks key and trigger applets to control SmartThings, WeMo and other services.
Featured
Attacknid robot with EZB V3: 18-inch walker with 12V lithium, dual H-bridge drive, sound/LED mic, 12-inch LED fan, under $100
question
Pizza Party At Ez Robot Tonight?
Looks like the gang is celebrating! They have a get together going with what looks like pizza boxes laying around and they are walking around with plates of...
8
3 k
Dunning-Kruger |
question
How To Gradually Increase And Lower The Value Of Pwm
Hello, I would like to gradually increase and lower the value of PWM. Does anyone know how to do? thank you
4
3 k
Rich |
question
One Pot For Two Devices For Feedback?
What do you all think? Is it possable to use one pot for two devices for feedback? I have one motor I have one pot attached to it so I can send...
20
6 k
Dunning-Kruger |
question
Dingbot And Other Small Classics
My mind needs a break from my big robot rover. Here is a photo of two classic Tomy's I have, the Dingbot and the dustbot. They're pretty small (though the...
0
3 k
mdeming1 |
question
Ez-B Not Getting Power, Regulator Heats Up
My ez-b is no longer turning on, I believe the regulator nearest to the LED doesn't work, it heats up a lot, how do I go about replacing it? Also my bluetooth module doesn't work anymore, do you know where I could find one of those? Oh and do u know how i could bypass it with regulated 5v to get it working right away thanks
8
2 k
tevans |
question
Intel Open Source 3D Robot
Caught this article last night. Seems a bit old but I would love to have one of these once the release the 3d stl files. Honestly cant wait to see what there going to...
5
3 k
Steve S |
question
Ebay Robots Ready For Ez-B
Here is a RAD that is perfect to hack with the EZ-B it's only 30 bucks plus 22 bucks for shipping. Linky
10
4 k
Mohamed.r |
question
Ezb V.4 Specs
Since the EZB is now starting to ship to some of us could we get a few specs. Things like. How many volts for input. I thought I read that there is not a regulator on it so what you put in is what you get out? Is that true? What would the best input voltage be, I assume 5 volts for the servos? How many amps does it put out safely? Any info would be...
5
3 k
jdebay |
question
Can't Find Control Command Clearlastglyph
What would be the exact syntax to clear last Glyph befor reusing it?
8
3 k
dicka |
question
Anyone Already Have The Old Jd Or Six Stl Files?
Anyone have the old JD or Six stl files? I know they are old but I would still like to have the "original" JD sitting on my desk at work.
8
3 k
Rich |
question
Switch On H-Bridge?
Hi, On the 2.5A Motor Controller that is sold on the EZ-Robot store, there is a pushbutton switch labeled "S1". It seems to toggle an LED that is labeled "5V...
6
4 k
Rich |
question
New To Robotics
Hi, I'm new to robotics and have an EZ robot on order. It won't ship for a few weeks so in the meantime I figured I would learn to use the EB software. I get the basic idea from watching the tutorials online. Is there a better way to get a head start? Any advice would be appreciated. On another note, I am especially interested in educational...
3
2 k
Rich |