Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands.
Featured
Tracked base with EZ-Controller and wireless IP camera; power camera via 5V (4×AA) pack and use separate battery for controller and servos.
question
Ez Dont Open Stl Files
hi got an error,the ARC dont open the stl files. anyone thank you
10
4 k
Nomad 6R |
question
Selecting Which Wireless Connection To Scan.
I have set up a separate router for my robots. It doesn't have wifi, so I bought separate dongle to use as an internet connection. I have a problem. ARC scans the first connection for ez-bs, but the ez-bs are on the second connection. How can I fix this?
2
3 k
CardboardHacke… |
question
Great New Look!
Looking good. Really nice. I like the way you have it set up.
21
4 k
Antron007 |
question
Ezb3 Won't Connect
Well, because of financial and health issues, I haven't hooked my EZBs up in a long long time. I went to connect them and they won't connect. It told me I needed v16.6 version and that I had v16.0 firmware. So, I updated the firmware. It connected up fine. I recycled the EZB. I tried to connect a it won't. So far, I have tried 9600, 115k, 57k, and...
12
4 k
MovieMaker |
question
I-Sobot For Sale
Hello to all. I am just letting it be known that I have a I-Sobot robot for sale. I already have another one and I am looking to sale one of them. I am going to be putting it up on EBay...
4
3 k
stonewolf |
question
Having Questions Loading Ezb 3 Projects With The New ARC Software
I am having problems running EZB3 projects on the new ARC. It starts to install ARC all over when I already have it installed. This happens when I click on a previous project or try to load it. I am running v16.6 and have already updated my firmware. confused
5
3 k
MovieMaker |
question
How To Use The Ez-B V4 In A Multirotor?
Hi! I'm Sumit from India and I wanted to ask you about how to use the EZ-B v4(the DIY Kit) to build a octorotor(multirotor) aircraft. I have built most of it but then I saw your product and thought why not make it better! My question is how will I connect the EZ-B v4 to the ESC that leads to the motor and use it? How can I set it up to control the...
2
2 k
Sumit |
question
Source For New V4 6Pin Camera Extention Cable
Need to make my V4 camera's cable longer... Seems to be a JST 2.0mm 6 pin cable... found this on eBay 6pin JST However, it looks...
20
7 k
Jeremie |
question
Hi Folks
Just found my way here after watching some amazing videos of the projects in this community. I started collecting robot rc toys and I have a Trendmasters lost in space 24" B9 coming from an ebay auction. I want to mod him although not as ambitiously as the amazing build here on the forum. Im thinking of adding lighting and a bluetooth speaker...
9
3 k
4R2D33700 |
question
Drive Trains
As more and more people are starting to use different drive trains for their projects, I thought we can have a thread where everyone can post about the drive trains they are using and the modifications they have done. It feel it will be very useful reference for all those who would want to start a new project...
1
3 k
Rich |
question
Wifi Connection To Ezb V.3
What I am doing wrong: I connected wifi module USR-WIFI232T with adopted power from 5v to 3.3v. Tx from EZB(v.3) connected to Rx on wifi module and Rx on EZB to Tx on...
5
4 k
donesvarc |
question
Battery Charger
What is the input voltage for the Battery Charger ? Can it be used on 230v 50 HZ? Ken
2
2 k
chken89 |