Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Interactive camera control for ARC: click-to-center and edge hotspots to pan/tilt servos, adjustable fine-tune and multi-camera support.
Featured
Omega robot build 75% complete using Rad Bot 1.0 tracks and plexiglass; pending neck/head, wiring, motorized tracks, RGB 8x8 eyes and EZ-B v4.
question
Virtual Camera's
I was thinking that one thing that might be useful is if ARC could export the video feed from the EZB camera to multiple virtual cameras. That way if you had multiple applications that you need the camera feed in at the same time it would be easy to do. Thanks
2
3 k
Darathian |
question
About Speech Generation
My files run fine on the desktop but when I imported ezb files from the past, they don't run the same as they did. They sort of pronounced the spelling of the word instead of...
10
4 k
Dunning-Kruger |
question
When I Put On A New Netbook, It Found Bluetooth Devices But Would Not Let Me Pa
I am trying to hook up two EZB3s and I am having problems pairing them. I erased them in order for windows to find them. But, as of yet, it hasn't. How can I force windows to ask for the pairing numbers? I really did the pooch this time. I deleted some very important files trying to get rid of the two uninstalled files in the device manager. There...
5
3 k
MovieMaker |
question
Can't Get Mimo Monitor Installed On Acer 810 Win8.1 Tablet
My mimo is installed in the Devices and Printers section, but it won't install as an Extended monitor. I...
16
5 k
MovieMaker |
question
Robo Claw 2X60, Ezb 4, Speech Recognition?
I have a robo claw 2x 60 motor controller. I have ezb4 connected via DO and D1. I am connected to the EZB4 with my computer as I can send sound files to it and it plays out the EZB4. I have assigned ports DO to left motor and D1 to right motor. I cannot make the motors do anything. I have previously used this controller with a RC receiver and it...
50
7 k
kamaroman68 |
question
Old Roli V/S New Roli
Hey there! This is Yash! I ordered the roli kit in october 2013 and would like to know whether I will be receiving the parts included in the OLD version of roli or the ones in the NEWER one. Because when I ordered the kit, the 2 three-servo robotic arms were not included in the kit itself. Also, that kit had 2 Li-Po batteries, whereas the newer one...
1
2 k
Jason |
question
Add Self-Tuning Feedback Motion Control To Your Sabertooth Or Syren Motor Driver
Here is a gadget that may help some that are using motors...
19
9 k
James Bellinge… |
question
Burning The Midnight Oil?
and there's a third guy I didn't catch in frame.
5
3 k
Kenny Storm |
question
Last ARC
does the last opdate ARC works whit the new camera only?
10
4 k
Luis Vazquez |
question
Ez-Robot Wayback Machine
It's always fun seeing how a company website changes over time using the Wayback Machine. Wayback Machine
3
3 k
DJ Sures |
question
Telnet On Win 8 ?
Hello im trying to get telnet to work but when I open it nothing happens other than it flashes and disappears completely how do I get it to stay open on windows 8 ?
8
3 k
Wolfie |
question
Another Question Piqued By Another Post.
I recently read a post regarding slowing down 12 volt motors. The servos I am using are powered via 12vdc - they are super heavy duty. I'm using them for neck pan and tilt. Now for the 2 part question... Using my built in webcam on my laptop I am trying to track my face and have the servos move accordingly. Is this possible? I ask because the...
13
4 k
Dunning-Kruger |