Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Detect audio frequencies via PC microphone (FFT), output a variable and drive servos within configurable min/max ranges with waveform feedback.
Featured
Work-in-progress cycloidal gearbox 40:1 driven by Tarot 4108 brushless motor, theoretically offering near-zero backlash.
question
Ez-Quadcopter, What Hardware?
Hi Guys, (Note: the following is quite summed up cause I had a long message typed out explaining in detail, but I unfortunately hit a wrong button and deleted...
16
6 k
CardboardHacke… |
question
How To Take A Pause At The End Pose?
i made some poses excample turn left so kd sees left and point the arm left. what am looking is that che stays 1 sec in this possition before posing ini.
5
3 k
Nomad 6R |
question
Ez Chronos 430-433 Or Ez Chronos 430-868 ?
dj whits one do you use?my pc became unstable and reboots itself. texas instru doesn support the 430-433 version no more
5
3 k
Nomad 6R |
question
Install Question
every time I try to install the new version app I get "problem parsing the package" message. I uninstalled older version first, which worked fine. my phone is an LG running android 4.0.3 (hand me down from daughter). any ideas please.
6
3 k
bborastero |
question
Continuous Servo Movement Panel
I have an ezb3 and am using the Continuous Servo Movement Panel window with the old 360 motors but it doesn't seem to do anything. I read the manual and it...
11
4 k
A.Bautista |
question
Laptop In The Bot
I have decided to put my small laptop i am using aboard my bot to cut down on any chance of a D/C issue. Is there anyway to hard-wire the two so there is no chance of D/C? And when I say hard-wire i mean simple plug and play solution ( i am not talking tearing stuff apart...and going all nuts on my poor lappy)
6
3 k
Dunning-Kruger |
question
New Ez Robot Accessories?
New EZ Robot Accessories? The EZ Robot Revolution has been a great achievement! D.J. and the awesome EZ Robot team deserve a great applause. I have a J.D. and my grandkids love it! How cool is it singing and dancing? My Mini 6 fabricated robot has been so much fun and satisfying building and operating. I love fabricating my own robots! The new EZB4...
1
3 k
Dunning-Kruger |
question
Building A Gripper
I reached the point with my Developer Kit that I needed a gripper. So I downloaded and printed the plastic parts but then discovered that I needed a smaller servo than what was in the Kit. So I ordered a micro servo which arrived yesterday. Looks like I need to modify either the micro servo or the housing to fit the micro servo into the gripper?...
4
2 k
castlephelps |
question
Polar Coordinate Steering
Thanks to everyone for helping me get up and going! I've learned how to connect hardware, download projects and learning ez scripting. I have never been one to reinvent the wheel so here goes.... I am looking to build a robot that will steer using polar coordinates. Is there an easy way to do this? Castle
19
4 k
castlephelps |
question
Lever Servo-Motor Stl File Question
pls help i need to download the whole STL parts of Lever Servo-motor... there's no download link for the body and top parts... guys! if you have a...
7
4 k
TAMCOFARMS |
question
Where Can I Find Ip From The Camera?
where can i find the ip or number to use the camera in ez bilder.
7
3 k
Nomad 6R |
question
Ez-Bilder
hi can you hellp me with EZ bilder because when i downlode the new 2015 version it will only be two fiels (exampels and http roots ) non of them have the main sofftwer stress
13
3 k
Steve G |