Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Open-source ARC plugin to control Robotis Dynamixel servos (XL-320, AX-12, XL430) via EZ-B, Arduino or Robotis. Supports position, speed, accel.
Featured
Rebuilt Hexapod Ziggy with HDD servos eliminates servo buzzing; 20‑servo metal frame, heavy battery load, Wave gait script rebuilt from scratch.
question
Ezb4 Trouble Shooting
Hi, What problem with my EZB4? When I start to run few heavy duty servo (4pcs), it is running normally. But It will auto restart when I add more servo (up to 8pcs)! Anyone can...
22
6 k
rickymahk2013 |
question
Ping Dj
Hey @DJ... Just a heads up... Check those bolts in inMoov's shoulders and elbows once in a while... Make sure they are good finger snug (maybe a little bit of wrench)... I say this because any slop (lateral movement) in the joint has a tendency to damage those plastic pots that read the joint rotation.... I killed 4 pots (in one shoulder) until I...
1
3 k
DJ Sures |
question
Camera Control Questions
In a couple of scripts I have commands to start a camera, however, if the camera is already on, when the command to start it runs - the camera stops. Also, in a script, I...
5
3 k
thetechguru |
question
Checking Volt Device
hi ,does anyone know off excisting devise you can plug on the 3pin wire, to see howmany volt still is in the batt.
8
3 k
Nomad 6R |
question
Adruino
how do i get ez-bot v3b too chat with an adruino uno
4
2 k
stibaer |
question
H-Bridge Question With Ez-B V4
Hello EZ-Robot Team, i have follow problem: I have a remodeled Omnibot 2000 I have successfully operated with the ECB-V3 and the H-bridge. Now I have changed to the EZ-B V4 and since then he moves only very slowly. When I use the PWM controller to Max. Point moves the robot extremely slow. I place the PWM regulator to slowly he drives no longer....
4
2 k
DJ Sures |
question
Ez-B V4 And Camera Combo
Hi, I want to know if your products can make a line follower with Quadcopter? Thanks.
8
2 k
CardboardHacke… |
question
Serial Terminal Ezb
Two questions here. This information below is coming from a Arduino, that is running 3 ultrasonic sensors. (1.) In the picture below, what are the numbers and letters for that appear...
1
2 k
DJ Sures |
question
Programming And Wiring
Hey all, I kinda have a two part question that I have just wondering.... 1) When it comes to creating the scripts, is there some sort of program flow that helps you create the...
6
3 k
RoboHappy |
question
Would You Like To Sell Your Omnibot 2000?
Hi robot makers, I search a Omnibot 2000 incl. Master Control Unit. Would you like to sell your Omnibot 2000? Please contact me. thanks Smarty
0
2 k
Smarty |
question
Camera Click Servo Plugin
I installed the Camera Click Servo Plugin, set up the servo info and then when I attached it, it automatically attached to Camera 2. (it wasn't even powered up) I have 2 cameras on my project and I need it to attach to Camera "1". I don't see a way to change the camera to the one I want.
2
2 k
bhouston |
question
Myo Armband
Hi, a really short question: Can i controll the JD with 2 x MYO Armbands? Or for later can i controll the left arm with one MYO and the right arm with a MYO but his time from a InMoov? Boris
10
4 k
Bravia |