Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Real-time VAD using 300-3400 Hz FFT to trigger scripts on speech start/stop, with sensitivity tuning, live audio level graph, and TTS pause.
Featured
Building a complete InMoov robot as a newbie learning assembly and programming while seeking mentorship.
question
Plug In Updates Question
@DJ, Quick question for you. What kinda of updates happen to certain plug ins when you post a new version? Since we don't have a list of updates for plug ins, can you explain what gets change/updated/modified, as an example, the last update to the dynamixel servos (now at v16). Thanks in advance.
2
2 k
fxrtst |
question
Connection Drops Out When Connecting From Android Phone App
I have a ver 1 I/O EZ Robot board, not sure if this is a problem, but when I try to connect to my android phone through the App, the conection drops out straight away. I can however connect to my android tablet through the app. I can't upgrade my board to the latest firmware as it says its only for ver 2 now, so I'm not sure how to downgrade to the...
7
2 k
thetechguru |
question
Modify Poses In Auto Position
i see the pose stand from sit is not in auto position. so it cant be adjust? anyone thank you
5
3 k
Nomad 6R |
question
Battery Does Not Charching
When I connect my robot, the lights blink red and it does not recharge. What can I do?
1
2 k
DJ Sures |
question
9-Axis Imu Sensor Ez-B V4 To Balance A Humanoid Robot
Hello guys I am working on robot legs but do not have a clue about how to use an 9-axis IMU sensor. Can I use one with this EZ-B v4 and does the EZ software have some sort of functionality to work out how to balance a humanoid robot? For example once it is standing I can shove it and it balances using a 9-axis IMU sensor with my EZ-B v4?. I am...
2
2 k
animator28 |
question
Iotiny/H-Bridge Help Needed Please
This is the first tech help post ive posted since i joined, there's something i just cant figure out.. Ive been having a lot of trouble recently trying...
11
3 k
Toyhackrobotic… |
question
Ezb4 With The Io Tiny
To whom it may concern I would like to know can I use the io tiny or the ezb4 controller to communicate with the another controller?
12
4 k
Jeremie |
question
Using Pir On Digital Port
Hey guys. I need a little help with a small PIR sensor I picked up. Operating voltage is 4.5 v upwards so have it plugged in to D0 as analog won't be enough to power it...
17
6 k
Nomad 6R |
question
New Product Release Coming Soon?
Curiosity has gotten the best of me. Any time frame on when the navigation system and maybe other items, will be released?
5
4 k
fxrtst |
question
Ez B V4 Audio Volume
I am having an issue with my V4 audio volume, I had the audio working fine, and I had used a breakout I saw from Dave S, since I am doing the same sort of project as him, it went...
9
3 k
Dave Schulpius |
question
Gps Navigating
The Speedometer recently burned out on my old Fiero GT so instead of replacing the dash board I simply downloaded the free GPS Digihud Speedometer to my Android cell phone and it is very...
9
3 k
Perry_S |
question
3D Print Request
So I am wanting to have someone 3d print a head cover for my Robosapian Blue. I am wanting the Protectotron head from Fallout 4 as a replacement head to fit on top of the robosapians...
25
6 k
JustinRatliff |