Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms by X,Y,Z(cm); computes joint angles (inverse kinematics), shows forward...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Example NMS Level #1 navigation skill showing subscription to combined scan+location data, displaying position and scan info; source code included.
Featured
Unboxing and assembly of a servo-equipped kit with servo alignment and the memorable captured moment
question
Stopping Audio In A Script
Hi, just trying to run a basic script to demo Six reacting to different Glyphs of album covers, speaking a line, doing a movement for a few seconds, then playing some of a track from the relevant artist. However despite using a 'Stop Audio' command after the final movement has ended the music won't stop. Am i missing something here? thanks in...
3
2 k
alydun |
question
Openjarvis-Kalliope Or Similar With Ezb
I've been looking around in the Forums and have seen some speech being used with EZB, but does anyone have a working example being used with say OpenJarvis, or Kalliope or similar? Kalliope-https://kalliope-project.github.io/ OpenJarvis- https://openjarvis.com/ I'm asking because some of the talking robots that I've seen coming up (InMoov for...
3
2 k
DJ Sures |
question
Questions For Any Hexapod Builders
Hey there guys I got a few questions for payload on anyone who is building or has built a hexapod. I've designed this guy up for my son this week. Its a...
8
3 k
fxrtst |
question
I Have You Now
darth jader s waponized.
2
2 k
Nomad 6R |
question
Jd Will Not Turn On
Today one of my JDs in my class would not turn back on. I unscrewed JDs back to double check all connections in his body and everything is intact. JD never indicated that it was on low battery after all JD was charged overnight. I've adjusted the female pins as shown in the video even though I didn't think that was the issue. This JD worked early...
9
3 k
mcriscitello |
question
Dynamixel's Crazy Hold
Anyone who is serious about professional servos should check out Dynamixels. I say professional because they are way overpriced. But, They now sell a $49 version that fits the...
6
3 k
PhG |
question
Anyone Looking For New Ideas For Diy Robots?
I found this article with some interesting concepts for home robots based on the Amazon warehouse Kiva robots spectrum.ieee.org/automaton/robotics/home-robots/inside-ticktocks-consumer-robot-product-explorations
0
3 k
faengelm |
question
Will These Be Available At Robotshop.Ca?
Does anyone know if these servos will be available at robotshop.ca? https://www.ez-robot.com/Shop/AccessoriesDetails.aspx?prevCat=9&productNumber=13 www.ez-robot.com/Shop/AccessoriesDetails.aspx?prevCat=9&productNumber=13
2
2 k
3dGuy |
question
Lipo Battery Auto Cut Off
Something I've been looking at since I undervoltaged one of my LiPo batteries is an auto cut off circuit when it get's below around 6.2v I think this will do it but could...
22
38 k
rhkean |
question
Humanoid Shoulder
I re-callibrated the shoulder on the Humanoid. I connect the robot and it is in the correct "ready" position. I have it perform one of the preprogrammed commands (ex sit) and the right shoulder will not demonstrate full range. When the robot finished its command, the right shoulder in no longer in the "ready" position. The arm...
5
2 k
michele.pratol… |
question
Robot Shop Servo Version
Can anyone confirm what version of the EZ Robot servos ship from the Robot Shop? I'm looking for an HHD standard servos local outlet. The shipping from China takes too long...
9
3 k
Nomad 6R |
question
Heads-Up Competition For Our Beloved Ez-Robot
Being the collector of robots that I am, I'm on more than a few mailing lists. I just got an email from the co-founder of Sphero announcing a "robot for everyone" platform: "Misty" https://www.mistyrobotics.com/ Granted, she's not a cheap date! But the sales pitch says things like "easy to program", "share your...
15
3 k
fxrtst |