Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms by X,Y,Z(cm); computes joint angles (inverse kinematics), shows forward...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Control LewanSoul LX-16A servos via ARC (EZ-B v4/IoTiny): assign virtual ports, read positions, set speeds, and enable continuous rotation.
Featured
Eve - share your impressions and feedback so far.
question
Help With Inmoov Project And Ez Robot Selection
Hi guys! a little introduction about me. last year our daughter Faye was born so project inmoov came to a hold. short nights...
10
4 k
Perry_S |
question
Switch And Connector Missing From Adventurebot Body
I recently received a selection of EZ-Robot parts, including the AdventureBot octagonal body, and the ez-b v4 WiFi...
5
2 k
DJ Sures |
question
T-Hex With Ez-B
I am building my first bot. Wish me luck. Lol. I have a T-hex 3 DOF chassis with EZ-Robots HDD servos and plan to use the EZ-B as the controller. I have the EZ-B v4/2 Developer Kit on the...
15
3 k
jeff7457 |
question
Leap Motion
Hello, Is there any support for Leap Motion controller? (I've seen that there was a discussion about it couple of years ago, but maybe something has changed since then) Thanks, Orit
3
2 k
DJ Sures |
question
Robot Arm And Cmm Model Suggestion
Hi! I'm making a system to check the distance between two transparent plastic materials. I'm thinking about using micro robot arms to check the coordinates and deliver the data. But it needs to identify the pieces to check it. Maybe mechanically by touching or maybe with a sensor. Which robot arm and which sensor should i choose? I'm also thinking...
0
2 k
osmankelle |
question
Operating Through Remote Networks
Greetings, Using chrome remote desktop with success for ez robot features . It seems for my purposes the Ps3 game controller operates (in network) the best for our beloved robot presently named Noisy Boy. Can't seem to get the game controller to operate on a remote network and computer. Both computers are set up with the app and the same...
9
3 k
Mastersailor |
question
Neck Bracket
hello Can anyone 3d print the neck bracket for a JD robot? willing to pay if resonable
5
3 k
Nomad 6R |
question
Problem With Speech Recognition
Hello to all, When I load my program with my speech recogition controll and it's commads saved from the previous save, the control does not work. If I delete...
20
4 k
Nomad 6R |
question
Inmoov Robot, How With Ez-B Robot Controller., ?
Hello Ezrobot Community, All, I'm wanting to test InMoov Robot using EzRobot but very unsure of what parts I need to get in...
27
5 k
dory |
question
Is Sabretooth Serial Still Supported?
Hi, I haven't used the sabretooth control in a while. I remember settings that I could use. Seem to be gone now. If I need to use movement panel how do I wiring up? I would like to be able to use with mobile interface. Thanks.
6
2 k
DJ Sures |
question
Johnny Five Robot Build
My name is Terry Andrews Jr. AKA, the "J5GURU" from Input-Inc. Already purchased this controller "ez-b v4/2" and Camera for possible use in the Johnny...
9
7 k
sfoy |
question
Where Can I Get A 3D Printed Servo Connector
So, I pulled my robot out of my bin after a long time, and then I realized that the brackets were broken on 3 servos! Is there a way I am able to get stl files for the neck servo bracket on jd, an hdd servo bracket , and a shoulder bracket? Thx
4
2 k
Electro Master |