Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms by X,Y,Z(cm); computes joint angles (inverse kinematics), shows forward...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Enable UWP voices, change default audio devices, capture audio and route it to EZB controllers with session tracking and device control.
Featured
Control multiple EZ-Robot Adventure Bot claws with one Logitech joystick using virtual servos, button scripts and a looping servo script.
question
Environment Requirements
I would like to know specifically if your robot can be programmed using Ipad, if so what is the required software or what is that I need to install. Thank you, Julian Robledo
1
2 k
Jeremie |
question
Servopluse Possible Script Command Request?
As we know ez robot servos seem to be able to travel a full 180deg range... However Hitec (and other servos) don't... @DJ I was wondering if we sent specific pulses to the large scale hitecs (instead of using the basic Servo command) if we could stretch them to 180deg?... For instance a new servo I am using for inMoov claims it can do 180deg, but...
6
3 k
ExSerCo |
question
Ibm Watson Plug In Service?
I’ve been looking into the services provided by Watson. I’m really impressed. Is this something that could be implemented like the other services we have, like Bing...
98
12 k
kazobond |
question
Wait For Object
I have one trained object. A simple blockly script with a "Wait For Object" plus a "If CameraObjectName =...". I run the script, point the camera around, finally at the...
5
2 k
wakon |
question
Connecting More Servos
Hi, Lets say i need more than 24x Digital I/O Pins in the EZ-B to connect a lot amount of servos,how do i achieve this goal? can i hook up 2 or more EZ-Bs to send messages to each other controlling all servos connected between them?
6
2 k
rz90208 |
question
Jd Needs 2 More Servos On The Top Of His Legs
Jd need 2 more servos at the top of his legs facing the front so he can lean and do the spits and walk in a more controlled manner.
3
2 k
Nomad 6R |
question
Inmoov Eye Mod For The Ez-B V4 Camera
Here is a quick mod I made up to fit the EZ-B Camera into the inmoov left eye. Just print it out and the camera slips in easily. Enjoy!...
19
6 k
Herr Ball |
question
Desktop Displays
Hi, I have two displays connected to my computer. Can I have Desktop1 on one display and Desktop2 on another? I want to be able to have the video player on full screen in Desktop2 while still been able to have Desktop1 on the other screen.
10
3 k
kazpet |
question
Sam Inmoov Finger Sensor Made Easy
Problem: 1. Current finger sensors require to many moving parts to make 2. Personal problem is I know very little about programing but I am learning...
6
4 k
DJ Sures |
question
Wow Wee Rovio 2008 Tear Down , What’S Inside? :)
Let’s go
0
3 k
jstarne1 |
question
Sam Inmoov Build Starting Oct 2018
This is a build of the Inmoov robot. I will be moving at the speed of my 3D printer and life. I humbly hope to improve upon the great work that has...
3
2 k
Dave Schulpius |
question
Jd Robot Servo Question
My JD Robot's servos start to buzz (and sometimes smoke) whenever I attempt to calibrate it. I later found out that I'm supposed to manually tune the servos if they require more than 10 degrees of fine tune. I watched all the tutorials in the past, but clearly forgot some important information. My servos require more than 100 degrees of tuning....
2
2 k
Aqua |