Robot Building Questions
Take control of your robot's destiny by subscribing to Synthiam ARC Pro, and watch it evolve into a versatile and responsive machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Builder Coffee Mug, 11oz
Start your robot building day on the right wheel, err foot, with this Synthiam Robot Builder black coffee mug. This...
Featured
GPS
Read longitude, latitude, speed and time from the ublox NEO-6M GPS
Featured
First Bot
I finally purchased an EZ-B, I didnt go with the kit (on a budget) just the board. My Idea is to make an autonomous vacuum, built out of...
question
4-1 Sensor
Hi everyone, have fitted an Ez-Robot 4-1 Orientation Sensor, went to calibrate and it disconnects from wi-fi? Never saw any readings from the variable watcher, tried different i2c ports with no...
8
3 k
Jeremie |
question
How Can You Fix The Camera Quality On Raspberry Pi 3B
How can you fix the camera Performance on raspberry pi 3B. I’m making a robot that tracks a red ball but because of the raspberry pi 3B’s GPU lagging it can’t process the ball. I did check the raspberry pi windows performance tips but with no changes in camera performance?
4
698
123345gom |
question
Iternet Connection
I have 2 JD Humanoids, both connect to the internet and initialise then go dead, still connected, blue light constant, but with no functions, The camera says its ready but when switched on immediately stops. If I disconnect and turn the robot off the site stay available and stops normal connections to the internet, I have to reboot the PC to get...
8
531
Dave Schulpius |
question
The Program Shuts Down When I Move The Simulator Pictures?
Why does the program shut down when I release the mouse button after moving one of JDs parts (servo)?
2
579
Synthiam Suppo… |
question
Problem Controlling Servos While On A Iphone Hotspot
Hello, I have a Darwin Mini that I hacked to also carry a Raspberry Pi Zero. The OpenCM connects to the Pi via Micro USB and I run ARC on my Windows laptop to connect to the Pi. I installed the OpenCM USB port settings on the Pi and so far I can successfully control the servos that are connected to OpenCM from ARC. When I run ls /dev/ttyA* on the...
6
624
DJ Sures |
question
ESP32 And A PCA9685 To Control 16 Servomotors With ARC
Good day, my problem is this: I want to build a robot myself. I already have the following servo control components: ESP32 and a PCA9685 to control 16 servomotors. I have already installed the ESP32 DOIT Dev Kit v1 EZ-B and the firmware for Synthiam and a control with 1 servo via WIFI works. how can I connect the PCA9685 to the ESP32 so that I can...
19
5 k
DJ Sures |
question
Using Seeed Studio Respeaker 2 Mics Pi Hat On A Raspberry Pi Zero
Hello, Im wondering if I could use the microphone on the Respeaker 2 mics pi hat (https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT_Raspberry/) on a Raspbery Pi Zero. So far I can only find information on using microphones on the platform running ARC. If there are ways - how do I pass the recorded audio file through speech recognition? Thanks.
2
802
DJ Sures |
question
HELP NEEDED FOR 21DOF EZB HUMANOID ROBOT
I have been struggling to assign servo positions to my robot. Old videos are either removed or are too old and doesnt seem to match the...
36
2 k
Toyhackrobotic… |
question
Please Fix This Feature : 19 Skills Instead Of 20
Hello, The ARC Teams edition is supposed to allow 20 skills. I have found that it allows no more than 19 and truncates...
6
664
Synthiam Suppo… |
question
ESP8266 Chip - Installing ARC
Will I be able to install ARC on the ESP8266 chip within the ESP 32 or will I need something other ESP 32 to make it work? Thanks.
2
742
petern |
question
SYNTHIAM 3D Logo STL WANTED
I thought I posted this question yesterday but it must not of stuck... I would like to display your logo on my Inmoov build on the shoulder plates. So if you are OK...
15
807
DJ Sures |
question
ARC Team Version Crashed On Launch
I just installed the latest version of ARC team that I got from this website. With that, the app crashed when I launched it. I have made sure that my Windows 11 pro got all the updates. I found the crash logs in Event Viewer like this: ============ Application: ARC.exe Framework Version: v4.0.30319 Description: The process was terminated due to an...
5
944
lmrobot |