-636459989693042832.jpg)
-636459989943960739.jpg)
-636459990485479714.jpg)
-636459980560649389.jpg)
-636459975718038038.jpg)
-636459969210457653.jpg)
-636459967995726605.jpg)
-636459970865108143.jpg)
-636465120384538626.jpg)
-636465113490053830.jpg)
-636475595612490698.jpg)
Here is the current look of this project, Super cool update, magpi magazine wants to feature this build with steps how it was done , !
By jstarne1
— Last update
Discover more robots
Mitzeljk's Meet Modi
Modi mobile voice-recognition robot controls a computer via EZ-B scripting and H-Bridge, built on an RC car base from...
Waynea's Tall Tower Light Controller - Ezb V4
Monitor 19 broadcast tower strobe lights remotely with EZ-B v4-easy relay integration, fault signaling and simple alerts...
Steve's Mini 6 Fabricated Robot
Mini Six EZ Robot with EZB3, micro servos and custom aluminum brackets - compact DIY build with Bluetooth speaker audio...
Pictures or it didn’t happen!
4 hole sets for the cameras and IR leds
8 hole sets for ultrasonic range finders
4 hole sets for Pyro Motion Detectors
1 EZ CAM hole
I’m testing out the grey plastidip now that all the holes for cameras and the sensors are made. Once you paint something all the little mistakes and rough edges really show, but this is all a trial run anyways
The dip is still wet , I misted 5 coats about 2 to 3 min close together under a 1000 watt lamp. I expect to have some texture but I’m checking out the color right now.
Plastidip is way darker after it cured.
So I descided to see what one RGB led in the top of the tower could produce.... I think I will keep it
It's starting to look like a Dalek! eek
Dalek, Yup that does sound menacing !
I installed the voltage meter on the front fairing and coated some sensors with plastidip to make them moisture resistant.
I think you should name the droid Ned Kelly.