Below are photos of my prototype Sentrybot that I assembled. It is currently controlled with an Arduino Mega and a Mini ITX. I'll be pulling the Arduino as soon as my EZ-B comes in. I've incorporated two digital CCD cameras that give stereo vision, digital range finder and GPS. Currently I have it set-up to navigate by detecting my wired dog fence.
By bumsteadsean
— Last update
Discover more robots
Ezang's Beginning 3D Printed Hand, Some Moves - Voice...
New hand project needs rework with better string, other commands and tips pending; still many tasks and development work...
Steve's Affirmative. K-9 2.0, Online And Fully Operational....
K-9 2.0 home robot using Synthiam ARC and EZ-B v4 for servos, speech and face recognition, DIY MDF/RC chassis and...
Ezang's My New And Improved Talk Servo
Enhanced ARC Talk Servo with Arduino Arc software for improved servo control and seamless Arduino integration
This is my second project. It is not pretty, but it is functional. I am able to navigate this bot via WiFi. I used wiper and window motors along with a linear actuator for the arm. I am able to easily grasp and lift 80 pounds with it.
@bumsteadsean
Hardcore ! you need to watch Black Mirror (Metalhead) episode.
Taking in consideration what happened in Florida couple days ago... I would replace the guns pictures (Does not reflect my political/guns view). I feel sorry for all those innocents and related families.
i saw it here on the news ,very sad.it was an AR riffle i think.
I must be living in a cave. I did not hear about Florida. Good grief. How sad. Comment taken well. Great suggestion.
On the turret of my bot was an air-soft pellet that the kids play with.
an ez robot is much better to play with.
Hey,
At least your cave is well protected
Is that a garbage bin ? How many batteries and amps ?
It is a recycle bin. I really liked its form factor.
12 and 24 volts / 5 to 10 amps and 15 amps respectively.
The taller bot (NOMAD) is 36 volts at 15 amps.
I use and modify cheap APC and Cyber Power uninterruptible power supplies. I get them cheap here in Michigan at Microcenter.
I love the Bin used as a cover.. I am trying to figure out how to mold fiberglass to make body panels. I don't have a 3d printer so I'm going to probably use fiber glass. This is a pretty sick robot.