As I said before, I've been working on a 24 DOF humanoid robot (what i believe to be the most DOF in a EZ-Robot humanoid) and I finally have a good camera to show him off! As you can see, his two wrist microservos are currently off. (I'm waiting for my threadlocker to glue/bolt these on) and as is his head (it hasn't come yet, same as the EZ-B v4)
All I need now is to extend the leg cables and get a bigger battery, glue the head and hands/wrists on, and he's ready!
Feel free to comment, if you have any suggestions, tell me!
(P.S, this IS a custom robot. This is not a standard Robotis robot.)
also, the pictures were taken later at night, so please excuse the darkness.
CURRENT OVERALL TOTAL (USD) : 1200 (about)
By Sudo the Banned
— Last update
Discover more robots
DJ's Cookie Monster Robot
EZ-B Cookie Monster robot: auto-collision detection, timed head motion, remote-controlled arms, radar screen, DIY frame
Confoundedhound's Modified Omnibot 2000
Refurbishing an Omnibot 2000 with new paint, +8" height, Asus t91mt netbook, and planned EZ-B controller - open to...
Daedalus's Android Robot
Talos 185 cm robot for home control and personal goods transport in supermarkets, inspired by the provided demo video.
bobbo whits one do you have?
Nonam@I have the Bioloid Premium Kit with the CM-530 controller and Zigbee module. I built the Bioloid type A.
i got also type A but whit chest comprehencive and cm-510.i use the 510 cause you can refirmwire servo's and controller.
Cool my Bioloid will be a EZ-B robot too! I need to buy a few more EZ-Bs.
same here.
Man, it's been a while since I posted in here! I'd just like to share what I did with the robot: -rewired the body to all be connected -changed the shoulder joints -added a battery to power the cooling fan/micro servos -fixed the way the arms work a bit
this should make it function a bit better when I finally get my EZB v4
i'll post the pictures as soon as my camera is charged
Cool!
sorry for the lack of pictures, i've actually started work on a body shell and i'll post results in a little bit