As I said before, I've been working on a 24 DOF humanoid robot (what i believe to be the most DOF in a EZ-Robot humanoid) and I finally have a good camera to show him off! As you can see, his two wrist microservos are currently off. (I'm waiting for my threadlocker to glue/bolt these on) and as is his head (it hasn't come yet, same as the EZ-B v4)
All I need now is to extend the leg cables and get a bigger battery, glue the head and hands/wrists on, and he's ready!
Feel free to comment, if you have any suggestions, tell me!
(P.S, this IS a custom robot. This is not a standard Robotis robot.)
also, the pictures were taken later at night, so please excuse the darkness.
CURRENT OVERALL TOTAL (USD) : 1200 (about)
By Sudo the Banned
— Last update
Discover more robots
Ezang's Photoresistor Project With ARC, Arduino, Python...
Photoresistor project using Synthiam ARC, Arduino and Python: red LED lights at high resistance, green LED at low...
Justinratliff's Redbender
RedBender test robot for Synthiam ARC: EZ-B v3, wireless camera, sonar, continuous-rotation and neck servos,...
DJ's Six Hexapod Robot Tracking Ball
Synthiam ARC configures a Six Hexapod to track and chase a red ball with tutorials, Robot Program episodes and EZ-Robot...
bobbo whits one do you have?
Nonam@I have the Bioloid Premium Kit with the CM-530 controller and Zigbee module. I built the Bioloid type A.
i got also type A but whit chest comprehencive and cm-510.i use the 510 cause you can refirmwire servo's and controller.
Cool my Bioloid will be a EZ-B robot too! I need to buy a few more EZ-Bs.
same here.
Man, it's been a while since I posted in here! I'd just like to share what I did with the robot: -rewired the body to all be connected -changed the shoulder joints -added a battery to power the cooling fan/micro servos -fixed the way the arms work a bit
this should make it function a bit better when I finally get my EZB v4
i'll post the pictures as soon as my camera is charged
Cool!
sorry for the lack of pictures, i've actually started work on a body shell and i'll post results in a little bit