This is the thread for my current project Dewy. He is a tall robot that uses RAD parts and models a omnibot in a way.
For showcases sake:
Here's the process of tearing down the RAD.
Here's where I finished off.
By CardboardHacker
— Last update
Discover more robots
Chiefavc's My Recent Projects After Getting My 3 Dev Kits
Robot photos showing multiple angles for build documentation, inspection, and troubleshooting.
DJ's Darth Vader Humanoid Robot
Darth Jader robot preview using old servos, short demo video showcasing movements ahead of The Robot Program episode.
Lumpy's Lumpy's Roomba Rover
Upgrade Arduino 4WD chassis with Roomba wheels for straighter motion; H-bridges mounted, connectors pending, EZ-B...
Update: masked of the areas I need to trim(melt away) so when my shipment arrives ill have a one day build with a video to go along with it.
Once again I changed my idea. Now, with all the dog robots I got sucked in and came up with an awesome design that involves the head of my broken(and even more broken now) idog dance. The idog has 2 35 ohm .5 watt speakers that, depending on DJ's reply, I will wire up to the speaker socket of the ez-b. kept some parts from the dance such as the 3.5mm headphone plug, the speakers and head, and some buttons that I hope I can make work with the ez-b. Will post pictures.
Here's the head after I wired in all my lights. Have to figure out how to mount in servo.
Ok so its been a long time since I posted and I thought I'd give an update seeing as I've changed the design so much. First I was going to make a big rollie, then I decided to put a dog head on it. Now I've changed my idea completely!
The sketch is out of proportion but it will use a clock head, a roli neck, the top half of a rad body, a white garbage can body, and the rad base at the bottom.
Yes? No? Tell me what you think!
Here's a concept drawing I did on the computer:
Tell me what you think!
My designs change mid-stream as well. I think that will be a nice platform to add stuff onto. Plenty of room for the internals.
I agree. Really what I will end up doing is putting all sorts of things into it. Mainly I need to get it running.
Got the clock head working off a switch so you can flick the switch and it rings. So loud! eek
About the hole. You could get it's dimensions and build a single arm and attach to the hole.