This is the thread for my current project Dewy. He is a tall robot that uses RAD parts and models a omnibot in a way.
For showcases sake:
Here's the process of tearing down the RAD.
Here's where I finished off.
By CardboardHacker
— Last update
Discover more robots
Ericez's I Create Baymax Doll Robot For Robot Theater Using...
Interactive Baymax robot for Big Hero theater: handmade costume with internal robot, Ez-B v4 for speech and...
Athena's R2D2 Testing
Seamless ez-b integration with my robot, main features tested successfully; vision and speech enhancements planned.
Ezang's Beginning 3D Printed Hand, Some Moves - Voice...
New hand project needs rework with better string, other commands and tips pending; still many tasks and development work...
Update: masked of the areas I need to trim(melt away) so when my shipment arrives ill have a one day build with a video to go along with it.
Once again I changed my idea. Now, with all the dog robots I got sucked in and came up with an awesome design that involves the head of my broken(and even more broken now) idog dance. The idog has 2 35 ohm .5 watt speakers that, depending on DJ's reply, I will wire up to the speaker socket of the ez-b. kept some parts from the dance such as the 3.5mm headphone plug, the speakers and head, and some buttons that I hope I can make work with the ez-b. Will post pictures.
Here's the head after I wired in all my lights. Have to figure out how to mount in servo.
Ok so its been a long time since I posted and I thought I'd give an update seeing as I've changed the design so much. First I was going to make a big rollie, then I decided to put a dog head on it. Now I've changed my idea completely!
The sketch is out of proportion but it will use a clock head, a roli neck, the top half of a rad body, a white garbage can body, and the rad base at the bottom.
Yes? No? Tell me what you think!
Here's a concept drawing I did on the computer:
Tell me what you think!
My designs change mid-stream as well. I think that will be a nice platform to add stuff onto. Plenty of room for the internals.
I agree. Really what I will end up doing is putting all sorts of things into it. Mainly I need to get it running.
Got the clock head working off a switch so you can flick the switch and it rings. So loud! eek
About the hole. You could get it's dimensions and build a single arm and attach to the hole.