I’d like to present to the community "Little Frankie". He was too scary at 7 feet tall, so I had to cut him down to about 1 foot.. He’s made up of a little bit of this, and a little bit of that. He has 12 Volt motors, and powered by a Venom 2200MaH 11.1V Lipo battery. Currently I have him running on an EZ-B V3 board, but soon I will transfer him over to the V4 (as soon as I buy another one). I’m waiting on some grippers to come in, but if they don’t come in soon I guess I’ll have to make a trip to the cemetery and grab a few body parts, ha, ha, ha. Once transferred over to the V4 I’ll be adding a few more items to him. Below are a few pictures of "Little Frankie" in the makings.
More robots by joseph4760
Other projects from the same builder.
Joseph4760's Wall-E To Wall-E-Nator
Wall-E-Nator custom build: Wall-E U-Command fused with Terminator parts, mid-build, adding LEDs, camera and painting...
Joseph4760's Project X-Men Juggernaut
Merge an MGA-1 Quadtrax with a Robosapien torso: hack the circuit, remove canopy, mount torso, run on EZ controller then...
Joseph4760's Project X-Men
Project X-Men: EZ-Robot custom builds, modified tank with IP camera and sensors, Brookstone Rover, RAD 2.0, Ghost Rider...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
Edison2's R2d2 Star Wars - Kinect!
R2D2 integrated with Kinect using EZ-B showcased at Campus Party Quito-easy robot building with EZ-B, demos and...
DJ's Revolution. The History Of
Revolution modular robot platform expands EZ-Robot with EZ-B v3 controller, 3D-printed prototypes, tutorials and a...
Justinratliff's Jd Spock
JD Spock 3D-printed Star Trek TOS phaser sized for JD, color-matched EZ_OST_phaser.stl and printable paper headpiece...














Very cool! Looking forward to seeing a video!
Thanks for posting
What kinda voice are you gonna hook up with little Frankie ?
@irobot58, thank you. when I get the grippers and, do a little more scripting I'll post a video.
@Robot-Doc, that's a good question. I'm open for suggestions.
I have a home recording studio. I can record some tracks and manipulate the sound to fit the character, but I guess I'll need an MP3 trigger to save them to.
@joseph4760 You won't need a mp3 trigger with the new ezb4... You can just use the soundboard control that is built into ARC.... Also, make sure you swap out that 11.1V Lipo for a 7.4V lipo when you get your V4... The servos you are using won't like 11.1V....
Wow! Neat!
Where did you get a 7' Frankie?
This made me laugh dude...love your sense of humor, Can't wait to see the outcome...