cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Luis's I2c Ezb Arduino1 Sensor
Use an Arduino as an I2C sensor controller for EZB3/4 to read PING ultrasonics via Ez-Builder with simple Arduino and...
DJ's Adventurebot Chasing Red Ball
Control AdventureBot with Synthiam ARC to track and chase a red ball, creating captivating vision-based robot behavior...
-635396587467336392.jpg)
Robot's R3 Roomba Control Using 5 Volt Relays
Control Roomba power via EZB + 5V relays, run SCI commands and sensor diagnostics using Synthiam ARC's UART terminal and...
so what are you using for wheels and motors
I have the stock.omnibot gearbox and wheels
Ok I started molding the vacuum in , I put two layers on tonight , I will trim down the bulk with the dremel then put one more coat on to level out low spots. I will spot apply to cover any pinholes. I did glue the vacuum in.more places , I will put probably two screws in it once its done to keep pressure on the filler and seems so they never delaminate.
Yup , if I can get him back from Sam this weekend, she's been working really hard on it I can't wait to see it!
I will start testing servos and the gear box I believe , the servo controller / tester is on the way , I literally plug it in and I.move it around in seconds so it will give me a idea of his range of motion. I am considering extending his forearms maybe a couple inches and maybe the wrist , it wouldnt hurt the looks since he is getting a 11 inch growth spurt lol. I'm so excited to make some videos of his arms and head moving around
@ Brett thanks for the hose! I'm trying to position the arms/ shoulder in a way I can cover it up , crossing my fingers this flex tubing does the trick!
wow! theres 124 pages on this!
It's looking really good Josh. You are making remarkable progress for such a complex build.
Thanks man , its you guys and your support that keep me going.
what keeps me going is building and designing robots and have loads of fun doing it
Got my.servo.driver!