cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Ezang's Mr. Big Bot For You See Laugh And Enjoy
My New Robot offers fun, entertaining demonstrations for you to see, laugh, and enjoy
Quantumsheep's Camera Robot Mk2
Travel-friendly foldable panobot supports 2.5kg DSLR, fits in a camera backpack and uses a refined app interface and...
Dunning-Kruger's Ez Dog (Inmoov Frankendog Failure)
Failed experiment prototype; planning a new version with design improvements and fresh ideas.
Sweet , Bret on your doorjam or a sticker on the bottom side of your hood there should be a paint code. That's a great color too
Paint reference for gm looks like I'm getting crystal red! https://paintref.com/cgi-bin/colorcodedisplay.cgi?type=sample&ditzler=915635&syear=2009&smanuf=GM&smodel=Corvette&sname=Crystal%20Red&name=corvette2009WA505Q
Ok buying paint tommorow but for now I gotta take care of suspension on this bot. These tires are old and could use some retreading. I picked two plastic rubber coating products. First is tool dip for heavy duty applications and spray tool dip for places I need extra thin coats like robots neck and shoulders in plain view. I used a paint brush to apply tool dip liquid rubber over the original 27 year old treads so this new rubber would maintain a original tread pattern.
After two thin coats , let them sit outside to cure , if you need a touchup wait till its cured 2 to 4 hours first.Nice Idea! I like it.
Ok I tested this paint on rubber and its a alternative for areas with lots of nooks and crannies that's hard to.get a flat piece into. This coating is safe and completely non conductive. Spray rubber works too I just noticed it goes on.thinner for each.coat and costs more in a spray can.
Ok I took the shoulder skirts off and washed them well. Here's the neck skirt next to freshly cleaned shoulder skirt. Soon as it dries it will get a coating inside and out of rubber to match the neck. Also I will coat the rear dummy wheels as well.
Ok I have a couple coats on the shoulder pieces , just a couple more coats inside and out once this dries.
all this work and only vacuum the floors,looks good