cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Vertigo's Getting Started On My Inmoov Head
I have mostly finished printing the inmoov head and began experimenting with my ezb controller and software. One of the...
51M0n76's Meet Arnie
HI this is my robot i call him Arnie (i dont know why) his head is on a pan/tilt joint so he can look around quite...
Sudo's Synthiam Humanoid Project
As I said before, Ive been working on a 24 DOF humanoid robot (what i believe to be the most DOF in a EZ-Robot humanoid)...
Ok the camera is mounted , I will probably do LEDs in the eyes but I am still thinking of putting a few IR LEDs in the eye sockets for additional illumination.
Nice job! You could mount IR LED's over the eyes to look like eyebrows and keep the regular LED's for eyes. Just a thought.
I'm glad you brought that up, I thought about making eyebrows from LEDs to give him more personality. Maybe even make it where certain LEDs turn on for one mood or another.
You could use the RGB color changing LED's and get three different moods from one source. I believe they change color depending on the voltage so that might be a nice way to do it.
Could you link me to this?
Ebay Link
or these:
Ebay Linky
@jstarne and others i designed h-bridge design and pcb boards all info in zip file,made this design awhile back and sold many boards if anyone needs to buy the boards let me know,more that buy the boards the lower the cost to have it made ,boards are in 2 parts ,main reason is that the board is universal logic circuit on one board and pwm h-bridge on another rated at 60 amp cont,but you can easy remove mosfets to save money,remove 4 of the 8 mosfets give you 30 amps i dont get money from this and dont need it HBRIDGE.zip files in bmp and sch
Ok time to do all the tedious wiring to the 9 different boards , pc 12 cooling fans , batteries , switches and camera 5v mod. First I was worried about arching accross my connections from the batteries. I soldered the clips on , heatshrink over them and I'm using turnigy quick disconnects. In the future ill move to lithium ion which turnigy uses these same high amp plugs.