I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Video will be coming of all movements
Here is a sample video
EzAng
By EzAng
— Last update
Discover more robots
Rgordon's Project Magnus On Hold
T.E.C.H. humanoid with EZ Board brain, two-wheel tank drive, scooter chain drive, camera-ready head, voice control,...
Tmesserschmidt's Topsie The Easy To Build Robot Dog
Build Topsie, a low-cost DIY quadruped-no 3D printing or soldering; assemble in a week and program walking gaits with...
Daedalus's Android Robot
Talos 185 cm robot for home control and personal goods transport in supermarkets, inspired by the provided demo video.


It works last nigh, I will check again
try this
ServoTestRahmen.stl
ezang
the link servoHolders stl is not dowloadeble ?
Nomad, oh buddy, try this:
ServoTestRahmen.stl
ezang
got it thanks .
Nomad, this works now
servoHolder.stl
get this one below:
This is the one I used, holds 5 micro servos
This works now also - who knows
EzAng
Nomad, did you ever get the file above = 5 micro servo holder?
hi ezang yes i got the file .
thanks
Very good,
What are you up to in the printing world ?
I have been learning fusion 360
be well
EzAng