I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Other robots from Synthiam community
Tezsmith's Linking Mathematica (Computational Software...
Synthiam ARC linked to Mathematica enables robots to read text, identify 10k+ objects, compute routes, use WolframAlpha...
Khanflicks's Super Mario Humanoid Project
Convert a Mario toy into a humanoid with servos and JD legs; troubleshooting loose servo fittings and phone connectivity...
DJ's Intel Realsense T265 Adventures-Bot Part 3
Localize an EZ-Robot AdventureBot with Intel RealSense T265 and Synthiam ARC NMS, waypoint navigation, SLAM prep, lidar...
It works last nigh, I will check again
try this
ServoTestRahmen.stl
ezang
the link servoHolders stl is not dowloadeble ?
Nomad, oh buddy, try this:
ServoTestRahmen.stl
ezang
got it thanks .
Nomad, this works now
servoHolder.stl
get this one below:
This is the one I used, holds 5 micro servos
This works now also - who knows
EzAng
Nomad, did you ever get the file above = 5 micro servo holder?
hi ezang yes i got the file .
thanks
Very good,
What are you up to in the printing world ?
I have been learning fusion 360
be well
EzAng