I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Discover more robots
Lumpy's Lumpy's Omnibot(S) - Spy Vs Spy
Omnibot restoration in Spy vs Spy black/white theme with front switches retained, Mr T and Pee-wee audio, wet-sanded...
Mita's First Robot From Bits Around The House
Build a 4-ft robot from an EZ kit using household parts: voice-activated head, Wii control, DIY sensors and kid-friendly...
Justinratliff's Finley Themed Robot
Finley robot with EZ-B v3: 12 servos, PING sonar, camera, grippers, built to pick up objects and integrate with Synthiam...
where are the files?
I see them online https://www.amazon.com/Meccano-20071983-6031222-6035545-Micronoid-Red-Socket/dp/B019HP2ANI/ref=sr_1_27?dchild=1&keywords=meccanoid+robot&qid=1609958239&sr=8-27
you can use a second handed meccanoid robot . there are no stl files from meccanoid that i know of.
Hey Nomad ever see this company?
https://www.garnerholt.com/
Garner Holt Productions, Inc. is the gateway to realms of incredible imagination, artistry, technical wizardry, experienced industry experts, and unmatched, proven quality. From creating the world’s finest and most lifelike animatronic figures, to design for themed attractions, museums, retail and restaurant locations and more, GHP is the most complete design and production workshop in the world.
ezang
site looks great . something for will for sure.
Reading 2 QR codes I made: the wrong way - the right way again changed topic
Hi Nomad,
I might have to change the guitar strings for something else, they may it easy to thread though the hand
I 3d printed a platform for the hand and super glued it on
platform.stl
using ARC and an IoTiny to operate it
Here is where I am at with the hand. Here are 2 pictures
EzAng
ezang
starting to look good .
I will have to get back to the hand by Sunday, looking for better fishing line for the fingers.
EzAng