Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Lsradets's EZ-Inmoov Robot Head
EZ-InMoov robot head with Synthiam 3D-printed parts and EZ-Robot electronics, programmable via Synthiam ARC for...
Justinratliff's Ez-Face
EZ-Face: standalone C# app using EmguCV for multi-face recognition with trainable names; integrates with Synthiam ARC...
Ezang's Mr. Conehead Dancing, Take 1 - I Will Try More...
Stabilize hard-to-balance Mr. ConeHead for dancing, preparing for Take 2.
As you can see...Prusa Slicer and also Windows are giving other results!
Maybe you will have to check your Cura settings?
i have a ceality ender-3 printer.
Are these the measurement you are getting if you put the model into Cura?
ok i got it.mine was 1.5 mm bigger.i print a new one.
thank for checking
the zoe tower . with funny eyes.
Supercool!!!
I downloaded the 3D model from the website, just like you did...and put the model into Cura! Could you let me know if you are having the same measurements now?
Maybe you scaled the model by accident?