Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Other robots from Synthiam community
DJ's I Taught Jd To Serve Snacks
Download the Synthiam robot app to help JD serve peanut butter M&Ms at Google's BotLuck event.
Luis's Using The Sure Dc Ss503v100 With Ezb4 From Ez-Robots
Connect Sure DC SS503V100 compass to EZ-Robots EZB4 via UART: RX/TX wiring, set OPT high to 3.3V, 4ft wire tested,...
Sbesk's First Ever Robot. Ish
Build and program a lightweight EZ-B3 quadruped with EZ-Builder; tips on 7.4V 800mAh LiPo hookup, servos, batteries and...
As you can see...Prusa Slicer and also Windows are giving other results!
Maybe you will have to check your Cura settings?
i have a ceality ender-3 printer.
Are these the measurement you are getting if you put the model into Cura?
ok i got it.mine was 1.5 mm bigger.i print a new one.
thank for checking
the zoe tower . with funny eyes.
Supercool!!!
I downloaded the 3D model from the website, just like you did...and put the model into Cura! Could you let me know if you are having the same measurements now?
Maybe you scaled the model by accident?